1. Cut a piece of wire approx. 6" long. At one end make a loop, using Round Nose Pliers.
   **See Head & Eye Pin Loop hint at end**



2. String the following beads in this order:

2mm SP (Silver Plated) Bead, Lavender Luster Twisted Bd, 2mm SP Bd, 4mm Light Amethyst Bd, Flat Star Bd, 8mm Amethyst Bd, Flat Star Bd, 4mm Light Amethyst Bd, 2mm SP Bd, 4mm Amethyst Bd, 4mm Light Amethyst Bd,

4mm Amethyst Bd, 2mm SP, Clear Twisted Bd, 2mm SP, 8mm Amethyst Bd, Cupped Spacer Bd, 8mm Amethyst Bd, 2mm SP, Flower Bd, Clear Twisted Bd, Flower Bd,

Lavender Twist Bd, Flower Bd, Clear Twist Bd, Flower Bd, 2mm SP Bd, 4mm Light Amethyst Bd, Flat Star Bd, 8mm Amy Bd, Flat Star Bd, 4mm Light Amethyst Bd, and 2mm SP Bd.

**Note:  This last 2mm silver plated bead will be the bottom of the wrap.**


3. Finish with a loop on the final end of the wire. Trim as needed.



4. Grape Cluster - The Grape Cluster looks good with anywhere from 12 to 15 beads.



1. Make 12-15 "Grapes": String a 4mm Amethyst bead on a gunmetal head pin, and make a loop. **See Head & Eye Pin Loop Directions.**
   Repeat until you have 12 - 15 "grapes."



2. Attach 2 "Grapes" to another Grape by connecting them loop to loop.
   **See Jump Ring Hint on how to open & close loops.**



3. Continue connecting 2 more grapes to the cluster by attaching one Grape to each end Grape, for a total of 5 Grapes.



4. Now using pliers, grasp one of the very end Grapes at it's loop, and let the bunch hang down. There should be a point at the opposite end, which will be the bottom Grape. From the loop of this grasped Grape, add the 2 Gunmetal Oval Jump Rings, one on top of the other.



5. Adjust the hold of the pliers to the end Jump Ring.
   **Hint: Wrap the handles of the pliers with a rubber band to hold in place.**
   By holding up the cluster, start adding more Grapes up the bunch. Attach them anywhere needed, on to other Grapes and on to the jump rings, filling in any holes.



6. To make the leaves, attach each leaf with a Medium Round Jump Ring and then connect the 2 together. Make sure the leaves are facing forward.



7. Attach the leaves to the Grape cluster by connecting one Jump Ring from a Leaf to the top Oval Jump Ring of the cluster. Again, make sure they are facing forward. With a Leaf on each side of the cluster, decide if more Grapes are needed and use the remaining ones as desired. Hang Grapes from the bottom of the Leaves also to fill in space.



8. Hang a desired Charm to that same Leaf Jump Ring, so that the charm hangs off to the side of the cluster.



5. Finish connecting the remaining pieces.




1. Using a White colored Head Pin, string the Light Amethyst crystal bead and make a loopat the end. Attach this piece to the bottom end loop of the wrap. (See Step 2.)



2. With a White Eye Pin, string the Clear crystal bead and make a loop. Attach this loop to the Grape cluster, off the connecting Leaf's Jump Ring.



3. Now attach the full cluster with Charm, from the opposite loop of the above crystal bead, to the top loop of the wrap.

6. Gently wrap around the stem of the wineglass. Depending on the length of the stem, the wrap should be spread out from top to bottom of the glass stem. The Grape cluster hangs at the very top of the stem and the Light Amethyst crystal dangle sits on the base of the glass, lending support to the wrap.

Other Wrap Ideas

• Set a beautiful table by using the same wrap as a matching Napkin Holder. Or decorate CandleSticks as a centerpiece.
• Give them as Wedding Gifts and use the Bride & Groom's chosen wedding color or use wedding charms to dangle.
• For parties, personalize each glass by using a different assortment of bead colors, or simply by changing the bottom Crystal Bead to a different color for each guest.
• Use the Grape Cluster Dangle to decorate Gifts or Wine Bottles.

To make nice round loops on head or eye pins:

1. String selected beads on the head or eye pin.
2. Keep about 8mm (1/3") of wire.
   Cut off any extra.
3. Use round nose pliers to grasp the wire just above the bead, at the arrow, and bend sharply away from you.
4. Now use small round nose pliers to grasp the tip of the wire, and bend it smoothly around the pliers down close to the beads.