602 results for 'nylon jaw pliers'

News & Information (441)

Carnival Queen Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsPlace 10mm cushion square stone into setting, and use nylon-jaw or chain-nose pliers to gently flatten the prongs onto the stone. See tips in our blog, for best ...

Ultra Simple Blue Rivoli Earrings Tutorial(Post)

These sparkling earrings use only 3 components, and 2 common pairs of jewelry pliers (available individually or in a kit). Ultra Blue AB is a vivid blue coating added to a Swarovski rivoli crystal. 1 ...

Grey Days Earrings(Post)

Created by: Rita HutchinsonDesigner TipsPlace Cushion Stone in Setting, pressing the bezel into place to hold the stone firm. Bend the prongs down from alternate sides to keep the stone centered. Use ...

Geared Ring Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

Just Peachy Leather Necklace Tutorial(Post)

Created by: Bridget AustinDesigner TipsSee the Jewelry Basics 101 PDF for hints and instructions on how to open and close jump rings.The cord ends and barrel beads are all crimped, no glue required!S ...

5 Minute Rings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

Tangerine Ring Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

Dulce Vida Crystal Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDisclaimer: I can't take credit for this design -- I made it at TierraCast's Tucson 2019 Event, copied 93.6% from one of their examples. I love how many variations are po ...

Sandra Leather Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-bru ...

Purple Haze Earrings Tutorial(Post)

Designer TipsSet Purple Haze cushion squares in settings, and use nylon jaw pliers to squeeze prongs down.Burnish the prongs smooth with a burnisher.Create 16 simple loops with the Golden Shadow crys ...

Golden Halos Earrings Tutorial(Post)

Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

Springtime Blues Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsApply a dab of Loctite gel to Swarovski Setting and place rivoli stone inside. Place on a level surface to dry (if you can find a flat Styrofoam remnant, press ...

Northern Copperhead Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

Ultra Blue Mehndi Earrings Tutorial(Post)

Extra-secure leverback ear wires keep these earrings safely in the ear -- no lost earrings! Ultra AB Blue may be a bit pricey, but it is stunning -- These simple earrings receive tons of compliments.

Pieces of the Sky Cuff Bracelet Tutorial(Post)

Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

Together Cause Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsString a bead cap, pastel pink pearl bead, and another bead cap onto the ball-end head pin and make a large wire-wrapped loop. Make the loop large enough, so t ...

Twilight Earrings Tutorial(Post)

The Swarovski crystal cushion square in Heliotrope is not always available, but we love this simple, versatile project design -- and Amethyst AB is so pretty, that we've linked in some alternate sugg ...

Tahitian DeLite Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCarefully set prongs over the stones using flat-nose pliers. (Nylon jaw pliers can help prevent chipping or scratching.) For step-by-step instructions, see l ...

Hawks Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse nylon-jaw pliers or a burnishing tool to gently smooth the prongs and bezels down onto the stones. For step-by-step instructions, see our ...

Victoria - Etched Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsEtch earrings (See etching tutorial below).Place cushion in cushion setting and fold over tabs using nylon-jaw pliers or a burnisher.Attach French hooks to top o ...

Green and Gold Bracelet Tutorial(Post)

Created by: The R&T Showroom TeamDesigner TipsPlace crystal stones in bezels, and carefully bend prongs down using fingers and/or nylon-jaw pliers.Add a large round jump ring to the football char ...

Sour Patch Bracelet Tutorial(Post)

Created by: Rita Hutchinson 12mm #4470 Cushion Squares by Swarovski are nearly gone, but these settings also work with most other brands of 12mm cushion squares. Shop remaining colors while they ...

Cardio Amour Wire Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsFor illustrated step-by-step instructions for this necklace, please see the full Heartbeat Necklace Tutorial in our blog.Suggested Supplies 1 ea ...

Arrow - Etched Copper Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

Winter is Coming - Post Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsAttach the pinch bail to the top of the snowflake crystal. Align the bail prongs and the crystal hanging holes, then pinch together. Once attached, you can use ...

Blue Halo Earrings Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

Twilight Tide Pool Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner Tips Memory wire is steel, and unkind to most jewelry tools. Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 coils. Th ...

April Love - Bracelet Tutorial(Post)

Created by: Sondra Barrington How can I customize thee? Let me count the ways...  Designer Tips  Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silve ...

Tassel and Sparkle - Simple Charm Bracelet Tutorial(Post)

Chain bracelets adorned with a simple charm continue to be popular. You can customize this design by using a different colored Swarovski rivoli stone, different styles of chain, or tassels made of di ...

Crimson and Gray Bracelet Tutorial(Post)

Created by: The Rings & Things Showroom TeamDesigner TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detaile ...

Go Zags - March Madness Bracelet(Post)

Created by: Summer Melaas   Designer TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detailed stamping inst ...

When the Day Met the Night(Post)

Created by: Tricia Van LeuvenShimming moonstone, sparkling Metallic Sunshine crystal, and Mystic Black pearls make a perfect set of jewelry for the next solar Eclipse. Try subbing malachite, azurite ...

Triple the Fun Bracelet Tutorial(Post)

Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing alcohol wipes, clean both Palace Crimp Ends on the inside.Using the black suede lace, make a double overhand knot in the center ...

A Ring A Day...(Post)

A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

Champagne Wishes and Mermaid Dreams Earrings Tutorial(Post)

Created by: Veronica Greenwood Designer TipsCut 6 inches of wire and make a small wrapped loop on one end. Make a small loop so the size 11 seeds do not go through.New to jewelry-making? For ste ...

A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/o ...

Purple and Gold Bracelet Tutorial(Post)

Created by: The R&T Showroom Team   Designer TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detailed s ...

Sundance Bolo Tie Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions to make the Sundance Bolo Tie Necklace, see our blog post: How to Make a Silk Ribbon and Cameo Bolo Tie NecklaceHelpfu ...

Silver Sea Urchin Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer Tips Memory wire is steel, and unkind to most jewelry tools.Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 ...

Stella, A Night on the Town Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsString desired pattern of spikes onto the Vintaj® Creative Hoop.Gently bend hoop so the holes are aligned tightly together.Select a medium-sized jump ...

Pumpkin on the Vine Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMake 2 matching spiral head pins. Follow the steps from the Rings & Things blog post "How to Make Spiral Head Pins.Add the following beads to a spiral head ...

12th Man Earrings Tutorial(Post)

Create a pair of sparkling earrings for your favorite football fan! These take just 5 minutes, and a few basic jewelry tools. No glue required, either!This pair of earrings features a "12" charm, but ...

DIY Lotus Paisley Bracelet(Post)

Created by: Sondra BarringtonDesigner TipsSet the cushion square crystal stone in the setting. Keeping the stone centered, use your fingers, a burnishing tool, or flat nylon-jaw pliers to gently bend ...

Sand Dollar Leather Bracelet Tutorial(Post)

This stylishly simple bracelet looks great worn alone, or with other bangles or leather bracelets.  Created by: Sondra Barrington   Designer TipsCut leather flush after measuring. Use a dab ...

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

On the Bias Corrugated Metal Earring Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCorrugate the metal blanks by feeding them through the Tube-Wringer® on the diagonal. Squeeze the hand grip to maintain even pressure while turning the turn key ...

Pleasant Dream Etched Barrette Tutorial(Post)

 Created by: Rita Hutchinson Designer TipsCut your metal sheet to desired size and use a file to round the corners and smooth all edges.Clean with Penny Brite® Copper Cleaner and scrubby un ...

Aurora Sprinkles Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsCut bezel strip to size (one 8-12" piece) and flatten/ work harden with nylon hammer.Add texture to both sides of bezel strip with texture stamping ham ...

Hearts and Rain Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdd bicone crystals to the head pins, and make wrapped loops directly onto the loops of the filigree.For the top beaded pin, cut the ball off a ball-end head ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Soar With Me Cuff Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsPatina, seal and use bracelet-bending pliers to apply a gentle curve to the metal sparrow before riveting it to the leather.For hints on applying Vintaj ...

Autumn Waterfall Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips3 sunny shades of orange crystal bicones cascade in a warm ombre waterfall, from Vintaj hammered brass rings.Make wire-wrapped loops using ball-end h ...

grrrrr / breathe bracelet tutorials(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a ruler and Sharpie to draw a dot or line in the middle if the bracelet. Write your word or phrase on a piece of paper, about the size you'll be stamping ...

Havasu Falls Earrings Tutorial(Post)

You can play around with the length of fringe on these earrings inspired by the Grand Canyon. Make them as short or as long as you would like them! My earrings in total length are just over 6". My lo ...

Spiral Lagoon Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPlace the TierraCast® link on the bracelet in desired location, and use a fine-point Sharpie® (or other extra black permanent marker) to mark where to punch ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

DIY Adjustable Bangle Bracelet Tutorial(Post)

This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

My Heart Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsSlide the bail over the crystal and press the bail closed, using finger pressure or chain-nose pliers. If using pliers, apply pressure cautiously so you don't ...

Shining Stars Lashed Earrings Tutorial(Post)

Created by: Mollie Valente Designer Tips For a version of this project with step-by-step images, check out Mollie's How to make Lashed Kidney Wire Earrings blog post.Choose two matchin ...

Briolette and Vine Earrings Tutorial(Post)

Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

Cowgirl Cuff Bracelet Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsUse the pein side (rounded) of your hammer to texturize the surface of the copper metal strip on the steel block.Using your metal shears, cut a 3/4 inch by 4 inc ...

Skullhead Barrette Tutorial(Post)

Created by: Rita Hutchinson Designer Tips Cut your metal sheet to desired size and use a file to round the corners and smooth all edges.Clean with Penny Brite® Copper Cleaner and scrubby un ...

Samba Scarlet Smile Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsLinks Updated!Use a nylon hammer to gently flatten the rock & roll oval link before stamping the plain side.Stamp a practice pattern on paper to ma ...

Paisley Palette Pin Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...

Squidly Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsPunch holes in desired locations (click into hole-punch details for usage instructions for this tool).Use ring bending pliers to make the brass blanks wavy.Use 3mm ...

Hearts Across the States Keychain Tutorial(Post)

Created by: Janet BoyingtonDesigner TipsStamp hearts in desired locations on USA blank, and then use the "." (period) from the punctuation set to connect the hearts. (New to metal stamping? See Metal ...

Corralled Pearls Necklace Tutorial(Post)

For their safety and your health, pearls and shells should always be drilled, reamed, etc underwater.Created by: Rita HutchinsonDesigner TipsCut a small piece of leather to test the hole sizes as you ...

Rough Around The Edges Hoop Earrings Tutorial(Post)

A drawplate is excellent for hardening soft wire without making it brittle, so custom ear wires and handmade hoops are springy and keep their shape.Created by: Rita HutchinsonDesigner TipsCut a lengt ...

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

Safe Journey Pendant Tutorial(Post)

Created by: Mollie Valente   Designer TipsTo add texture, place the metal blank on the steel block and use the ball end of the hammer to make a lightly hammered surface.After hammering, the meta ...

Patterned Wire Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsMeasure, mark and cut patterned wire to desired length.File ends smooth with slightly rounded corners, so the wire pieces match the curve of the disk ...

Bubble Wand - Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut a 10" piece of wire.To straighten and harden the wire, run the length of the wire through the nylon pliers.Use the ring mandrel to form a "bubble" loop (our ...

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

Modern Art Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsStretch and wax 2 yards of thread. Add a spare seed bead (stopper bead) about 2" into the thread.Stitch an edging stitch on one side of the GF square, following ...

Wire Jewelry 101(Post)

Jewelry making wire gives you endless choices in creativity! Still, it's easier to get started once you know a few basic tips and terms that will help you determine what type of wire to use for your ...

Sacred Curling Stone Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsUse 6 wavy disks with the dapping set, to create domed bead caps to fit the rotund trade beads. Flatten the rest with a nylon hammer to create 12mm brass heishi.

Cities in Bloom Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a permanent marker to draw a few clouds in the sky, and tufts of grass on the ground. (After etching, I thought my tufts of grass looked more like a city ...

How to Make Loops on Head & Eye Pins(Post)

Basic Loops:The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way f ...

Gentle Souls Bracelet 2 Tutorial(Post)

As a graceful nod to the free-spirited Bohemian trend, we created a set of beautiful bracelets in softly muted hues: smoky quartz, warm gold, smoked topaz, antique brass, rose gold amber and iridesce ...

Polynesian Sunset Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsFor step by step instructions on making loops, see: Jewelry Basics 101 (PDF).String beads in random pattern in varying 3 to 5" lengths on beading ...

Spiral Skull Earrings Tutorial(Post)

Use memory wire to create your own ear wires!Created by: Rita HutchinsonDesigner TipsUse heavy-duty flush cutters to cut 2 equal lengths of memory wire.Form a loop at one end using sturdy round-nose ...

Shoreline Bangle Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsMake wire-wrapped loops with the pearls, and add a jump ring to each charm. For instructions on wire-wrapped loops, and best way to open and close jump rings, ...

Vintner Earrings Tutorial(Post)

Vintaj findings are designed to be alterable ... here's a fine example!Created by: Rita HutchinsonDesigner TipsSlightly flatten the dome of the Vintaj bead cap. Bend 3 of the "legs" around the sides ...

Jump Ring Hint(Post)

When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

Celebrations Day of the Dead Tutorial(Post)

Celebrations Day of the Dead bracelet depicts the musical side of this holiday. The beautiful TierraCast musical charms nicely offset the Swarovski Crystal Mystic Black pearls.Created by: Swarovski's ...

Hexed Wire Bracelet - Tutorial(Post)

Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required!Created by: Rita HutchinsonDesigner TipsUnroll and straighten enough wire for all brace ...

Simple Elegance Earrings Tutorial(Post)

Created by: Summer Melaas   Designer TipsOpen loop at bottom of ear wire. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF),Slide one connector onto the ear wi ...

Matte Satin Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

Candy Corn All Dressed Up - Earrings Tutorial(Post)

Created by: Janet BoyingtonThese earrings were inspired by the Swarovski crystal candy corn earrings. Janet used a decreasing brick stitch to create the candy corn. Designer TipsBegin with the bottom ...

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on t ...

Sunshine Squared Necklace Tutorial(Post)

Created by: Bridget AustinDesigner TipsNo jump rings are needed; all you need are the links from the chain, to combine the sew-on stones and clasp.See the Jewelry Basics 101 (PDF) for instructions on ...

Emerald City Garden Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor illustrated step-by-step instructions for making this pair of earrings, and links to additional sweet-and-simple designs, see our blog article: The 15-Minut ...

Silver and Bright Necklace(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies1 #56-216-36-3 Instant Pendant with Screw-On Cone - Silver Color (pack)1 #26-114-3 Silver Plated Metal Beads, 5x5mm Barrel, Large Hole (100 Piec ...

Dragonfly Drop Earrings(Post)

Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

All Black and White Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut chain to a length of 8 links. Attach one end to earwire for ease in handling.Create dangles with crystal beads and round metal beads, and wire wrap directl ...

Threads of Turquoise Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer Tips  Wire wrap the crystals directly onto the ear thread chain. See Basic Jewelry-Making Technique Sheet (PDF) for detailed instruction on ...

Crimping 101(Post)

Using crimp beads to finish a necklace or bracelet: 1. String a crimp bead onto the beading cord or wire cable, then string the clasp. 2. Bend the cable back through the crimp bead. 3. Tighten the lo ...

Red Bird Enameled Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

TierraCast Luna Moth Necklace Tutorial(Post)

Created by: Tracy Proctor of TierraCastDesigner TipsString 8mm gemstone pebble bead and 1 gold spacer onto head pin. Bend wire over at top of spacer and use round nose pliers to form a 1/8" simple lo ...

Fresh Pots Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...