null
In Stock

Antiqued Brass Plated Jump Ring, Round, Heavy, 4.5mm (ounce)

1 review Write a Review
$10.20

Bulk discount rates

  • Buy 4 - 7 pay only $8.50
  • Buy 8 - 15 pay only $7.14
  • Buy 16+ pay only $6.29
HINT    When you open and close jump rings, twist ends instead of  "ovaling" them. This keeps their round shape better, which makes  them easier to close neatly.     See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
HINT    When you open and close jump rings, twist ends instead of  "ovaling" them. This keeps their round shape better, which makes  them easier to close neatly.     See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
HINT    When you open and close jump rings, twist ends instead of  "ovaling" them. This keeps their round shape better, which makes  them easier to close neatly.     See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
SKU:
37-133-6
Current Stock:
$10.20

Frequently Bought Together:

HINT    When you open and close jump rings, twist ends instead of  "ovaling" them. This keeps their round shape better, which makes  them easier to close neatly.     See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
Inc. Tax
Ex. Tax

Description

HINT

Jump Rings

When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly.


See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Details

Sold by:
ounce
Color:
Antiqued Brass Plated
Size:
Approx. 4.5mm, 20-gauge
Additional Info:
Approx. 510 per pack
Thickness:
20 ga (0.81mm)
Country of Origin:
United States
Hole Size:
3.2mm

Product Reviews

  • 5

    Strong

    These are great jump rings as you don't have to worry about something light hanging your jewelry and losing part of your necklace or bracelet.

Customers Also Viewed

Trade Beads We carry a wide variety of African beads, both old trade beads and newer beads made or strung in Africa for the world-wide bead trade. Trade beads are old and/or used beads, and will show varying amounts of wear. Newly-made African beads are generally handmade in small communities. With all trade beads, style and availability vary greatly. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Trade Bead, 5" Opalescent Faceted (Each)

$32.00
Trade Beads We carry a wide variety of African beads, both old trade beads and newer beads made or strung in Africa for the world-wide bead trade. Trade beads are old and/or used beads, and will show...
     Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Silver Plated Head Pin, 2", Standard (ounce)

$7.45
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
     Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Silver Plated Head Pin, 7/8", Thin (Pack)

$6.94
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
     Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Silver Plated Head Pin, 1-1/2", Thin (ounce)

$11.86
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...