null
Out of stock

Argentium Sterling Silver Ball End Head Pin, 1" (10 Pieces)

No reviews yet Write a Review
$5.28

Bulk discount rates

SKU:
37-577-A

Frequently Bought Together:

Inc. Tax
Ex. Tax

Description

This unprecedented, patented material is redefining the jewelry industry. Argentium sterling silver has dramatically better tarnish resistance than standard sterling silver and is much more durable. While it still contains the 92.5% fine silver legally required for sterling, Argentium replaces about 1% of the normal copper content in sterling with germanium, significantly altering the alloy's properties.

Benefits of Argentium® Sterling Silver

  • Tarnish resistant: A light dusting or occasional wipe with a soft cloth is all you need to keep its shine. The resistance actually increases over time (the germanium atoms migrate to the surface, which allows the protective germanium oxide layer to regenerate).
  • Resistant to dents, scratches and abrasion.
  • Better for the environment because it doesn't develop firescale (a reddish patina) when heated, which eliminates processes that use hazardous materials needed to strip firescale from standard sterling materials.
  • Laser weldable, opening new design possibilities.
  • Can be hardened (through thermal conditioning) to be almost twice as tough as standard sterling.

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Details

Sold by:
ten
Length:
1 inch
Size:
1
Additional Info:
10 per pack
Thickness:
24 ga (0.51mm)
Country of Origin:
United States
Style:
Ball End

Product Reviews

Related Products

Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Sterling Silver Ball End Head Pin, 1" (10 Pieces)

$11.61
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
Add to Cart

Customers Also Viewed

Red Jasper displays an earthy acorn-red color with dark-gray stripes and specks. The stripes in these semiprecious beads are veins of quartz. Red jaspers are favored by by gemstone healers, for regulating metabolic energy and promoting physical stamina. They are also believed to have the ability to send negative energy back to the sender, the way a mirror reflects light. Red jasper beads are a popular choice for the sacral (base) chakra, in chakra jewelry. See the Related Products links below for similar items, and more information about this stone.

Red Jasper 2x4mm Gemstone Heishi Beads (strand)

$8.29
Red Jasper displays an earthy acorn-red color with dark-gray stripes and specks. The stripes in these semiprecious beads are veins of quartz. Red jaspers are favored by by gemstone healers, for...
Add to Cart