39-890-02 Copper Clasp, "S"

Description
Details
Product Reviews

Description

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Questions? E-mail us for friendly, expert help!

Details

Sold by:	ten
Color:	Copper Plated
Size:	Approx. 12x20mm, 7mm rings
Theme:	Hook: S
Additional Info:	10 per pack
Country of Origin:	India

Product Reviews

TierraCast Antiqued Copper Plated Clasp S Hook Classic (10 Pieces)

TierraCast

$10.95

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Out of stock

These bar and ring sets (toggle clasp sets) can be clasped with one hand making them ideal for bracelets and watches. Please note: The last few beads you put near the clasp should be small, to make sure the bar can be pulled all the way through the ring (making the clasp easier to close). Size listed is outside diameter of the ring (excluding its loop) and the length of the bar. Price is per set, rather than per piece. Toggle Clasps and Bracelets It's true! Toggles can be clasped with one hand, so they are good for bracelets, including watch bracelets. Here's a hint to help make sure no one loses one of your creations: When using toggle clasps for bracelets, the bracelet must fit the customer fairly well. If the bracelet is too loose, a short toggle bar might wiggle itself out of its loop. Longer bars can help solve the problem, but won't eliminate it. To size your bracelets to your customers' wrists you might want to use a few chain links at the end, between the clasp and the last beads. Then you can remove or add links at the time of sale. Or if you really have a good thing going, make 6.5", 7", and 8" versions of your best-selling patterns and colors of bracelets. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Solid Copper Toggle Clasp, Teardrop (10 Pieces)

$4.00

These bar and ring sets (toggle clasp sets) can be clasped with one hand making them ideal for bracelets and watches. Please note: The last few beads you put near the clasp should be small, to...

Out of stock

These bar and ring sets can be clasped with one hand making them ideal for bracelets and watches. Please note: The last few beads you put near the clasp should be small, to make sure the bar will go all the way through the ring (making the clasp easier to close). Size listed is outside diameter of the ring (excluding its loop) and the length of the bar. Price is per set, rather than per piece. Toggle Clasps and Bracelets It's true! Toggles can be clasped with one hand, so they are good for bracelets, including watch bracelets. Here's a hint to help make sure no one loses one of your creations: When using toggle clasps for bracelets, the bracelet must fit the customer fairly well. If the bracelet is too loose, a short toggle bar might wiggle itself out of its loop. Longer bars can help solve the problem, but won't eliminate it. To size your bracelets to your customers' wrists you might want to use a few chain links at the end, between the clasp and the last beads. Then you can remove or add links at the time of sale. Or if you really have a good thing going, make 6.5", 7", and 8" versions of your best-selling patterns and colors of bracelets. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Solid Copper Adjustable Toggle Clasp, 4-Ring (10 Pieces)

$8.50

These bar and ring sets can be clasped with one hand making them ideal for bracelets and watches. Please note: The last few beads you put near the clasp should be small, to make sure the bar...

Out of stock

These economy lobster clasps are cast from a zinc-alloy material and then plated. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Copper Plated Lobster Clasp, 12x22mm (12 Pieces)

$8.99

These economy lobster clasps are cast from a zinc-alloy material and then plated. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used...

Quantity:

Add to Cart

The platings on antiqued ball chain and accessories is not as durable as our typical platings. Just like items with a natural patina, normal wear will lighten the high points, while the crevices will remain dark. In order to keep the clasps dark, we recommend coating them with a spray lacquer sealer before wear. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Antiqued Copper Plated Ball Chain Clasp, 4.8mm (100 Pieces)

$18.62

The platings on antiqued ball chain and accessories is not as durable as our typical platings. Just like items with a natural patina, normal wear will lighten the high points, while the crevices...

Quantity:

Add to Cart

PRESTIGE 1122 Rivoli Stone, 14mm - Crystal Royal Red DeLite Lacquer (Each)

PRESTIGE Crystal

$1.49

Royal Red DeLite PRESTIGE Crystal Crystal Royal Red DeLite Lacquer begins with a clear PRESTIGE Crystal crystal base, then a Shimmer coating is applied to the back, with a final layer of Shiny...

Quantity:

Add to Cart

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Embellished Blossom Beaded Teardrop Charm - Antiqued Gold Plated (Each)

$0.75

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Quantity:

Add to Cart

Enameling Tips:Enamel is durable, but not totally infallible. Handle finished pieces with care.Do all metal shaping, stamping, punching, etc. before adding enamels.Thoroughly clean your metal before enameling. Penny Brite works great!Before sifting enamel onto the piece, spray on a light coat of Klyr-Fire to help enamel stay in place with an even coating.To paint instead of sift, mix with Klyr Fire or approximately 40% water (to get desired consistency) and paint with a small sable paintbrush. You may want to fire a layer of Opaque White Undercoat first.Sift or paint enamel in desired pattern, carefully transfer to your firing station, and fire!If torch firing, watch closely: when the enamel begins to melt, you'll see a glossy "orange peel" stage where the enamel beads up before slumping to a smooth enameled sheen. Fire a bit more, but don't overheat - some colors will scorch.Allow to slowly cool. A warmed pan (or small crockpot) of vermiculite works great.Clean as necessary - Penny Brite or a brief pickle, maybe a little underwater grinding with an alundum stone.Keep all your leftover / spilled enamel powder. If the colors get mixed, save them in a separate bin for use as a counter (back side) enamel. Place a creased paper on your sifting worksurface, so you can easily dump excess enamel back in the container or a mixed jar.Enameling Safety:Eye protection and a fine-particulate mask are recommended when working with enamels.Wash hands thoroughly when done, and avoid rubbing your eyes.If working regularly with enamels, we suggest protective gloves to prevent irritation from small glass particles.When torch-firing:Prepare a fireproof work area, and remove clutter.A fire extinguisher nearby and good ventilation are important.Consider wearing an apron, closed-toe shoes and natural fiber clothing, and avoiding loose hair, flowy clothing and dangling jewelry.Keep food, drinks, pets and small children away from your enamel and/or firing workspace.Metal Compatibility & Color:Copper "paint chip" in image shows how this enamel looks on copper. Opaque colors are on their own. Translucent and opalescent colors have Foundation White on the bottom portion, and then a layer of translucent or opalescent color over the Foundation White and part-way up the bare copper. The color number was stamped on each strip of copper before enameling.The firing temperature range for our enamels is 1,400°-1,500°F (760°-815°C), and they have a coefficient of expansion (COE) from 258 to 360, cubic expansion. Metals that work with these enamels must have a higher melting point, and a similar COE. Otherwise your metal may melt before your enamel, or the enamel may pop off when your jewelry is exposed to temperature changes.Specifically, these enamels work with copper, gold, low-carbon steel and fine silver. This includes fired copper clay and fine-silver clay. (And some alloys of brass work -- we've had good luck with Vintaj brass blanks and our 24g brass blanks, especially with the higher COE colors, but color results have been unpredictable with brass -- they often require a 2nd layer and 2nd firing to get the color you were aiming for.)Specific COE for most colors is listed in the "Additional specs" field on this page. For more information about why COE is important for people who like to experiment with alternate metals, see the Thompson Enamel Workbook. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Thompson Translucent 80-mesh Enamel for Metals - Chartreuse, 2-oz. (Each)

Thompson

$7.40

Enameling Tips:Enamel is durable, but not totally infallible. Handle finished pieces with care.Do all metal shaping, stamping, punching, etc. before adding enamels.Thoroughly clean your metal before...

Out of stock

This style of chain by the foot is also available by the full spool.See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Gold Plated Peanut Chain, 2.8mm by the FOOT

$2.40

This style of chain by the foot is also available by the full spool.See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item...

Quantity:

Add to Cart

These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

24ga Brass Stamping Blank, Bar, 38 x 6.5mm (Each)

$0.46

These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links...

Quantity:

Add to Cart

Copper Clasp, "S" (10 Pieces)

Bulk discount rates

Frequently Bought Together:

Description

Details

Product Reviews

Customers Also Viewed

PRESTIGE 1122 Rivoli Stone, 14mm - Crystal Royal Red DeLite Lacquer (Each)

Embellished Blossom Beaded Teardrop Charm - Antiqued Gold Plated (Each)

Thompson Translucent 80-mesh Enamel for Metals - Chartreuse, 2-oz. (Each)

Gold Plated Peanut Chain, 2.8mm by the FOOT

24ga Brass Stamping Blank, Bar, 38 x 6.5mm (Each)

Copper Clasp, "S" (10 Pieces)

Write a Review

Copper Clasp, "S" (10 Pieces)

Bulk discount rates

Frequently Bought Together:

Description

Details

Product Reviews

Related Products

Customers Also Viewed