Rings & Things Jewelry Blog

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14-20mm round mandrel, looping pliers, or bail-making pliers.Using good flush cutters, snip each coil apart so you have identically-sized links. Trim carefully so the ends of the links line up flush. If you have gaps, your solder join will not look good and will not be secure. (See copper soldering blog …

Created by: Polly Nobbs-LaRueDesigner TipsAdd desired beads to eye pin, and use one-step looper (or wire cutters and round-nose pliers) to make a simple loop at the other end.When creating your new loops, face them the same direction as the existing loops on the eye pins. New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF)Use chain-nose (non-serrated flat-nose) pliers to twist open each loop, attach the charm or clip-on, and twist closed.Suggested Supplies1 strand [use 2] #21-8 …

Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF).Connect the ear wire to one end of the beaded eye pin.Carefully add vine bail to flat briolette pendant, and squeeze tight with fingers or nylon-jaw pliers.Cindy used a link of her favorite cable chain as a jump ring to connect the bail to the rest of the earring. If you don't "just ha …