Rings & Things Jewelry Blog

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14-20mm round mandrel, looping pliers, or bail-making pliers.Using good flush cutters, snip each coil apart so you have identically-sized links. Trim carefully so the ends of the links line up flush. If you have gaps, your solder join will not look good and will not be secure. (See copper soldering blog …

Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and pour a starting layer.When first pour is cured, mix a new batch (add glitter), and pour to fill the bezel.Create decorative section of chain with crystal and metal beads. The crystals are on thicker wire with simple loops. The corrugated beads are on 24-gauge wire with wrapped loops. Wrap the beaded se …

Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewelry cutter on memory wire. (Use a heavy duty cutter rated for steel wire.)This free-form design features the beads listed, in a randomly appealing manner. Add as many or as few beads as you would like to create your own custom bangle.A loop at each end keeps the beads on the wire and provides a nice w …