Rings & Things Jewelry Blog

This project uses Swarovski crystals and TierraCast® components. Created by: Rita Hutchinson. Design by: CREATE YOUR STYLE.Designer TipsUse the puffed rondelle bead to fill the opening in the large end of the artemis bead.Add beads to head pin in same order as in photo.Make a simple loop at the top of the head pin (see Basic Jewelry-Making Technique Sheet PDF)Slightly open loop on ear wire (see Jump Ring tip in Jewelry-Making Technique sheet) to add angel. Close securely.Repeat for other earring …

Created by: Rita HutchinsonDesigner TipsAdd crystals, angels wing beads and spacers to head pins and finish with a simple loop.Because the large end of the dome beads are concave, it can be tricky to measure and cut the headpin for making your loop. Press thumb or other finger against the head of the pin, to pull it up to the inside of the dome for best results.Use any ear wire you like with these designs.These designs can be made as a pendant, by only making one.Free Technique Sheets & How …

Designer TipsAdd a cone bead (wide side first) to a head pin. Next add a wing bead, round crystal bead, and the rhinestone wheel bead (halo).Make a simple loop at the top of the head pin. For best ways to make loops on head pins, see Jewelry Basics 101 (PDF)Open the loop on the ear wire (twist side-ways, like shown in the Jewelry Basics 101 PDF), slide angel onto ear wire, and securely close ear wire loop. Repeat for other earring, and enjoy!Suggested Supplies1 #AngelEarringsCrystal Angel Earrin …