Rings & Things Jewelry Blog

Created by: Mollie ValenteFor step-by-step instructions -- with photographs -- for this project, see our blog article: Jewelry Making: DIY Bat-Signal Magnetic Pin.Parts-List and More Links Below...Suggested Supplies1 5-pack (use 1 piece) #83-511-02-042 Glass Bezel, Oval, 35x28mm1 each #27-960-23-901 Cameo, Bat, 25x18mm1 meter (use 4 inches) #46-342-1 Crystal/ Rhodium Plated Swarovski Rhinestone Chain, 14pp1 each #38-409-1 White Plated Pin Magnet, Round1 each #60-280 Adhesive, Crafter's Pick, The …

Created by: Laurae SatherDesigner TipsCut the post portion off the rivoli earring finding.File the back until you have an approximately 4-5mm flat spot (about the same diameter as the earring magnet).Mix two-part epoxy according to manufacturer's directions.Apply epoxy to the flat portion of the rivoli setting, and place 1 part of the magnet set on the glued area.Once thoroughly cured, mix more epoxy and glue the rivoli into a rivoli setting. Set aside to cure.To wear, place the other part of th …