Rings & Things Jewelry Blog

This project uses Swarovski crystals.Created by: Amy MickelsonDesigner TipsPlace flat back crystal hearts on a work surface with the flat side up.Mix two-part epoxy according to the package directions.Use a toothpick to apply a small amount of epoxy to the flat pad of each earring post and glue each to the center of a flat back crystal heart. Set aside to cure.These sparkly yet simple earrings can be worn with jeans, or for a festive occasion.Free Technique Sheets & How-TosGluing Metal Findi …

Created by: Lindsey Green Designer Tips Use three layers of Magic-Glos UV Resin to create the look of the crystal rivoli standing free in the bezel cup earrings.A piece of Styrofoam® or sponge material works great to keep the jewelry in place. Simply stick the post of the earring into the styrofoam or sponge to keep the jewelry level.Add a base layer of resin to the bezel cup and then cure it with the UV light.After the first layer is dry, pour a second layer into the bezel. …

Created by: Laurae SatherDesigner TipsCut the post portion off the rivoli earring finding.File the back until you have an approximately 4-5mm flat spot (about the same diameter as the earring magnet).Mix two-part epoxy according to manufacturer's directions.Apply epoxy to the flat portion of the rivoli setting, and place 1 part of the magnet set on the glued area.Once thoroughly cured, mix more epoxy and glue the rivoli into a rivoli setting. Set aside to cure.To wear, place the other part of th …