Rings & Things Jewelry Blog

Created by: Summer Melaas   Designer TipsAdd about 1/2" of soil, a small amount of moss, then sedum or other tiny succulents to a glass bottle charm. Total dirt/moss should be about 3/4". Mist very lightly as needed to maintain; do not overwater.Cut roughly 12" of wire. Wrap wire around the bottle approx. 3 times. Wrap wire one more time half way so that both wires are on opposite sides of the bottle. Make loops with each one of these wires for your chain. Continue to wrap the wire 2 m …

Created by: Veronica Greenwood     Designer TipsChoose the size of chaton to fit into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your charm and place your chaton. Set aside to dry.Cut 6" of wire, make a loop on one end and attach it to the loop on your post. Finish wrapping and cut the extra wire off. For step-by-step wire wrapped loop instructions, see Jewelry Basics 101 (PDF).Add three bamboo coral beads, one strawberry q …

Created by: TierraCastDesigner TipsMeasure 48" of 1mm cotton cord and cut into 2, 24" pieces. Wrap around fingers 5 times and tuck top of wrap into cord end. Secure with glue or crimping.Twist each oval jump ring open and use to link one succulent post with one tassel. Reverse the twist to close. For most secure way way to open and close jump rings, see Jewelry Basics 101 (PDF).Fasten earring backs to posts.Suggested Supplies1 pair #32-130-12-AS TierraCast Succulent posts2 each #48-070-01-AS Tie …