Tool Sets

Shaping, Smoothing and Texturing Tools Clean your tools promptly after each use, so you can save the scrap silver and re-use it.  It might not seem like much each time, but it can add up to a lot of saved money! Small screw-tight cosmetic...

Use this jewelry tool set to cut brass, copper and sterling silver wire; create wrapped or basic loops; open and close jump rings, ear wires and other jewelry loops; trim beading cord; lay out bracelet, anklet and necklace designs; and precisely position...

The opening on the long reach riveting tool is 0.20" (5mm) taller than the standard riveting tool to accommodate taller / thicker pieces. Punch components used with the standard size tool and long reach tool are NOT interchangeable, with one exception:...

The opening on the long reach riveting tool is 0.20" (5mm) taller than the standard riveting tool to accommodate taller / thicker pieces. Punch components used with the standard size tool and long reach tool are NOT interchangeable, with one exception:...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Use this basic jewelry tool set to cut brass, copper and sterling silver wire; create wrapped or basic loops; open and close jump rings, ear wires and other jewelry loops; precisely position knots; trim beading cord; and easily scoop small beads up to...

What's a Jig? Have you ever made something from wire, and then wanted to make that exact same shape again? That's what a jig is for! A jig is a tool that helps you repeat a pattern, shape or angle, so you can easily make matching earrings, or so your...

Confused about rivets or riveting tools? See Riveting 101, or our blog articles:Best Riveting Tool Set andWhat's the Difference Between Semi-Tubular Rivets and Wire Rivets?This video by Crafted Findings demonstrates how to use their riveting tool for...

More information about these tools:Use cup burs to eliminate sharp wire ends in jewelry making. This is especially important for ear wires and earring posts, but can be important for any ends in wire wrapping, that could potentially poke or scratch. Use...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Complete List of Items Included in the Metal Stamping Tool Mini Kit (#69-298-A) One BeadSmith 3mm (1/8") Gothic Uppercase Letters Metal Stamp Set One BeadSmith 3mm (1/8") Gothic Numbers Metal Stamp Set One 2.5" Steel Block One EURO TOOL...

Confused about rivets or riveting tools? See Riveting 101, or our blog articles:Best Riveting Tool Set andWhat's the Difference Between Semi-Tubular Rivets and Wire Rivets? This video by Crafted Findings demonstrates how to use their riveting tool for...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

For most materials, we suggest that you submerge the item in a small amount of water and work alternately from both sides of the bead. Submerging the item in a bit of water helps prevent noxious dust. (Drilling/cutting most shell, for example, creates...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

To install a blade in the saw frame: Loosen the wing nuts on the saw. Slip one end of the blade into the fixture. Make sure the blade's teeth are pointing out and down. (Sort of like a Christmas tree.) Tighten the wing nut, then apply pressure from...

This is a great set of basic jewelry making tools. It has all the basics that you need for making wire-wrapped loops, opening and closing jump rings, trimming stray wire ends and other common jewelry-making basics.  See Related Products links...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Use this 6-piece jewelry tool set to cut brass, copper and sterling silver wire; create wrapped or basic loops; open and close jump rings, ear wires and other jewelry loops; ream out poorly drilled beads or rough holes; and precisely position knots.See...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.Questions? E-mail us for friendly, expert help!

Made in the U.S.A. EURO TOOL is known for producing innovative & quality jewelry making tools & supplies. This handle included in this set, also works perfectly for EURO TOOL's 4" needle file set (our item #69-140).  See Related Products links (below)...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. This video by ImpressArt shows how to texture and shape a cuff bracelet

Use this high quality basic jewelry tool set to smoothly cut brass, copper and sterling silver wire; create wrapped or basic loops; open and close jump rings, ear wires and other jewelry loops.See Related Products links (below) for similar items and...

Complete List of Items Included in the Metal Stamping Tool Kit (#69-299-A) One 6mm Gothic Uppercase Letters Metal Stamp Set One 6mm Gothic Numbers Metal Stamp Set One pair EURO TOOL Metal Cutting Shears One 4" Steel Block One EURO TOOL...

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Kit includes:  4 - Hole punches: 3/32" (2.4mm), 1/8" (3.2mm), 3/16" (4.8mm), 1/4" (6.4mm)3 - Lacing chisels1 - 8mm (5/16") spot piercer3 - Eyelet/Grommet setters: Small (3/32"), Medium (3/16") and Large (1/4")1 - Eyelet flaring cone1 - Line 20...

Take your jewelry making to the next level with The Beadsmith Deluxe Jewelry Pliers Ergonomic Tool Kit! This four-piece set is perfect for beginners and seasoned artists alike, with super fine points and sturdy Box Joint construction that ensure...

Upgrade your jewelry-making game with The Beadsmith Deluxe Jewelry Pliers Ergonomic Tool Kit. Say goodbye to hand fatigue and hello to comfort with the ergonomic handles on each of the nine included tools. With box joint construction and sturdy pliers,...

Make every bead count with The Beadsmith Micro Mini Jewelry Tool Kit. Designed with precision in mind, this 4-piece set of miniature pliers is perfect for tackling those hard-to-reach areas and creating intricate details for your handmade jewelry...