null
In Stock

Raw Brass Jump Ring, Round, 10mm (ounce)

No reviews yet Write a Review
$3.72

Bulk discount rates

  • Buy 4 - 7 pay only $3.10
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
SKU:
37-178-0
$3.72

Frequently Bought Together:

HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
Inc. Tax
Ex. Tax

Description

HINT

Jump Rings

  • When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly.
  • Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it.
  • Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354).

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Details

Sold by:
ounce
Color:
Raw
Size:
Approx. 10mm, 16-gauge
Additional Info:
Approx. 90 per pack
Thickness:
16 ga (1.30mm)
Country of Origin:
United States
Hole Size:
8.0mm

Product Reviews

Related Products

HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Raw Brass Jump Ring, Round, 3mm (ounce)

$7.20
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items...
Add to Cart
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it.Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it.Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Raw Brass Jump Ring, Round, 4mm (ounce)

$5.40
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items...
Add to Cart

Customers Also Viewed

HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items sometimes have a thin coat of oil. Warm water and detergent (dry to avoid water spots) or alcohol and a cotton ball are all it takes to remove it. Since brass is a copper alloy, prolonged contact may discolor the skin of the wearer. Raw brass items will develop a natural patina over time unless sealed. To speed up the patina process, try applying an oxidizing solution such as Win-Ox (#86-343) or liver of sulfur (#86-354). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Raw Brass Jump Ring, Round, 6mm (Pack)

$3.88
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. Raw brass items...
Add to Cart
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Antiqued Brass Eye Pin, 1-1/2", Thin (Pack)

$6.75
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
Add to Cart
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

White Plated Head Pin, 3", Standard (ounce)

$6.89
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
Add to Cart
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

White Plated Head Pin, 2-1/2", Standard (ounce)

$6.26
Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
Add to Cart
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Yellow Plated Jump Ring, Round, 13.5mm (ounce)

$14.23
HINT When you open and close jump rings, twist ends instead of "ovaling" them. This keeps their round shape better, which makes them easier to close neatly. See Related Products links...
Add to Cart