Description
How to Set Crystal Rivets | |
 1. Gather supplies: rivets, metal blank, leather, rivet setter, rubber mat and 5/32" hole punch (plus a 1/8" hole punch if the leather also needs to be punched). |  2. Position the leather and metal components, and mark hole placement on each. |
 3. Center the mark in the hole on the bottom side of the punch. |  4. Create a hole in each blank. |
 5. Push the rivet through the hole in the leather flower, then through the metal blank. |  6. Put the cap on the back. |
 7. Place on the rubber mat, crystal side down. |  8. Position the concave end of the rivet setting over the cap and strike with a hammer firmly until rivet is set. |
 9. A crystal riveted necklace pendant! | |
Note: These crystal rivets work well for materials totalling approximately 2-3mm thick.
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.
Details
Sold by: |
5-pack |
Color: |
Blue Zircon/ Silver Plated |
Size: |
6mm diameter head, 3.5mm diameter post, 7mm diameter cap |
Additional Info: |
5 per pack |
Country of Origin: |
Czech Republic |
Brand: |
ImpressArt |
