Rings & Things Jewelry Blog

Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and pour a starting layer.When first pour is cured, mix a new batch (add glitter), and pour to fill the bezel.Create decorative section of chain with crystal and metal beads. The crystals are on thicker wire with simple loops. The corrugated beads are on 24-gauge wire with wrapped loops. Wrap the beaded se …

Created by: Lindsey Green Designer Tips Use three layers of Magic-Glos UV Resin to create the look of the crystal rivoli standing free in the bezel cup earrings.A piece of Styrofoam® or sponge material works great to keep the jewelry in place. Simply stick the post of the earring into the styrofoam or sponge to keep the jewelry level.Add a base layer of resin to the bezel cup and then cure it with the UV light.After the first layer is dry, pour a second layer into the bezel. …

Created by: Mollie ValenteDesigner TipsPlan your layout for design and fit.Use two-part epoxy to glue the mosaic components in place. Allow to cure overnight.Mix grout according to manufacturer's instructions. Read and follow application and clean up directions.Apply the grout to the mosaic in a circular motion while pushing the grout into all voids.Allow grout to set for 10 minutes, then use a slightly damp sponge to clean up excess grout and smooth the surface. Rinse sponge and repeat until cl …