Click into any item for more details & related supplies.
- Edged cuff bracelets can be embellished with beadwork, leather, or fabric. The ends have a section that allows you to tuck the ends of beadwork or fabric out of view. These bracelets are handmade, and are not always available. Stock up when you can!
- Channel cuff bracelets are also known as "Hair Tie Bracelets" because they are the perfect size for safely storing hair ties when you get tired of having your hair pulled back. Raw brass channel cuffs can also be used for some types of inlaid designs with resins or polymer clay.
- Flat bracelet blanks are normally used for stamping custom words, phrases or textures... but don't let that stop you from altering them in other ways!
- Open-style and wire cuff bracelets are perfect for covering with beads, wire or your favorite fibers.
Raw (solid) copper and brass bracelet blanks can be stamped, etched with ferric chloride, engraved, riveted and more. They are partially finished, and may require a bit of filing, sanding or tumbling, to smooth rough edges.
- 6" copper sheet in 1/2", 1" and 2" widths are perfect bracelets strips for average size wrists.
- 24 gauge is lightweight and easy to work with, but requires a second layer to be sturdy enough for a good bracelet. You can stamp or texture it, then rivet or solder to a bracelet blank of contrasting material.
- 20 gauge is a good compromise: it's still easy to stamp, embellish and otherwise work with, but it's also sturdy enough to hold up when worn as a bracelet.
- 14-gauge bracelet blanks are flat, and pre-cut to 5-3/4" (for small/medium wrists), 6-1/4" (for medium/large wrists), and 7" (good size for a guy). The ends are curved, and the blanks are ready to customize!
Aluminum bracelet blanks by ImpressArt are a great alternative to sterling silver, nickel silver, or silver plated blanks. This soft, inexpensive metal allows intricate and delicate stamping designs to make complete impressions and look great. For most metals, 14-gauge would be too thick for metal stamping, but because aluminum is a soft metal, 14 gauge is a good compromise between stampability and bracelet durability. Customize aluminum blanks with metal stamps, texture hammers, rivets and engravers. After stamping or otherwise embellishing, these bracelets can easily be bent on an oval bracelet mandrel or using the E-Z Bender tool. They polish up beautifully! more info about aluminum
ImpressArt aluminum bracelet blanks are transitioning to a new look and feel. They will be made of the same high quality alloy as ImpressArt's other aluminum blanks, so they will be more malleable, making them easier to stamp and bend. ImpressArt bracelets will also feature new squared ends, providing a more comfortable feel and a sleeker, more timeless look than the current rounded ends. This transition will take some time -- some sizes/shapes will transition sooner than others.- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Cuff Bracelet with Edges, 1-1/2" - Silver Plated (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 1" - Silver Plated (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 1-1/2" - Polished Brass (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 3/4" - Silver Plated (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Brass 3/4" Domed Cuff Bracelet Finding (Each)
$2.29Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Cuff Bracelet with Edges, 1-1/4" - Silver Plated (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 1-1/4" - Polished Brass (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 3/4" - Polished Brass (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Cuff Bracelet with Edges, 1" - Polished Brass (Each)
$5.19Ice Resin Leather Adhesive works well to glue leather to metal jewelry findings. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert... -
Bracelet Blank, Brass Cuff, 1/4x6-1/4" (Each)
$2.13See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! -
Brass 1" Concave Cuff Bracelet Finding (Each)
$3.43Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Brass 1" Domed Cuff Bracelet Finding (Each)
$3.43Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Brass 1/2" Cuff Bracelet Finding (Each)
$3.06Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Solid Copper Cuff Bracelet Finding, 3/4" x 5.75" (Each)
$4.82Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Brass 1-1/2" Domed Cuff Bracelet Finding (Each)
$4.11Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Bracelet Finding, Cuff, Concave, 3/4" (Each)
$3.06Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
ImpressArt 14g Aluminum Cuff Bracelet Blank, 6x3/8" (Each)
ImpressArt$0.65These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. Ā Peel off the protective blue film before using. See Related Products links... -
ImpressArt 14g Aluminum Cuff Bracelet Blank, 6x5/8" (Each)
ImpressArt$0.83These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. Peel off the protective blue film before using. 2021 Update: ImpressArt aluminum... -
Brass 1.5" Concave Cuff Bracelet Finding (Each)
$3.94Raw brass is unplated brass that has been formed from sheet and wire. Grease can remain on the items from the machine during the manufacturing process. To remove grease or tarnish, use warm water and detergent (dry to avoid water spots), or alcohol... -
Brass 2" Domed Cuff Bracelet Finding (Each)
$5.37Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
ImpressArt 16g Brass Petite Cuff Bracelet Blank, 3/8x5" (Each)
ImpressArt$1.64These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional... -
Bracelet Blank, Copper Cuff, 3/4x5-3/4" (Each)
$5.07These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Copper 2" Concave Cuff Bracelet Finding (Each)
$6.73Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
Bracelet Blank, Copper Cuff, 1/4x5-3/4" (Each)
$2.34These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Copper 1" Concave Cuff Bracelet Finding (Each)
$4.32Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
Solid Copper Cuff Bracelet Finding, 1/2" x 5.75" (Each)
$3.78Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Centerline 3 Row Cuff, 5.5x.38" - Rhodium Plated (Each)
$6.19Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
Solid Copper Cuff Bracelet Finding, 3/4 x 7" (Each)
$6.34Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Bracelet Blank, Copper Cuff, 1/2x6-1/4" (Each)
$4.32These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Bracelet Blank, Brass Cuff, 3/4x6-1/4" (Each)
$3.81See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! -
Bracelet Blank, Copper Cuff, 1/4 x 7" (Each)
$3.13These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Bracelet Blank, Copper Cuff, 3/4 x 7" (Each)
$5.95These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
ImpressArt 14g Aluminum Cuff Bracelet Blank, 6x1.5" (Each)
ImpressArt$1.47These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. Peel off the protective blue film before using. See Related Products links (below)... -
ImpressArt 14g Aluminum Petite Cuff Bracelet Blank, 5x3/8" (Each)
ImpressArt$0.68These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional... -
Bracelet Blank, Copper Cuff, 3/8 x 7" (Each)
$3.94These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Copper 2" Domed Cuff Bracelet Finding (Each)
$3.96Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
ImpressArt 14g Aluminum Cuff Bracelet Blank, 7x5/8" (Each)
ImpressArt$0.93These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. Peel off the protective blue film before using. See Related Products links (below)... -
Sterling Silver Bracelet, Cuff, Half Round Wire (Each)
$11.75If your custom centerpiece has loops with an inner diameter smaller than 2mm, or you'd like to use a sterling silver bezel cup with this, use sterling jump rings to attach your centerpiece. Green Silver All our sterling silver items are nickel free... -
Copper 1-1/2" Domed Cuff Bracelet Finding (Each)
$5.17Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
Copper Sheet, 24 Gauge, 6x0.5" (pack)
$7.15Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, and/or remove rough edges,... -
Solid Copper Cuff Bracelet Finding, 1/4" x 5.75" (Each)
$2.41Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Copper Sheet, 20 Gauge, 6x0.5" (pack)
$7.57Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, and/or remove rough edges,... -
Bracelet Blank, Copper Cuff, 1/2 x 7" (Each)
$5.10These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing.14-gauge copper can be a little tough to stamp. We recommend the... -
Brass 2" Concave Cuff Bracelet Finding (Each)
$5.37Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Bracelet Blank, Copper Cuff, 3/4x6-1/4" (Each)
$5.71These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Centerline 3 Row Cuff, 8x.38" - Gold Plated (Each)
$5.57Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
Bracelet Finding, Cuff, Open, 3/4" (Each)
The Beadsmith$5.49Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Copper Sheet, 20 Gauge, 6x2" (pack)
$25.88Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, and/or remove rough edges,... -
ImpressArt Aluminum Cuff Bracelet Blank, Tapered, 6x5/8" (Each)
ImpressArt$0.78These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional jewelry-making... -
Copper 1-1/2" Concave Cuff Bracelet Finding (Each)
$5.17Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
Bracelet Finding, Cuff, Open, 1/2" (Each)
$7.82Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Centerline 3 Row Cuff, 5.5x.38" - Gold Plated (Each)
The Beadsmith$7.97Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
ImpressArt Brass Cuff Bracelet Blank, Tapered, 6x5/8" (Each)
ImpressArt$2.83These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional... -
Bracelet Blank, Copper Cuff, 3/8x5-3/4" (Each)
$2.89These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Solid Copper Cuff Bracelet Finding, 3/8 x 7" (Each)
$3.87Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Solid Copper Cuff Bracelet Finding, 1/4 x 7" (Each)
$2.97Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Copper 1" Domed Cuff Bracelet Finding (Each)
$4.32Raw copper is unplated, and may not be as shiny as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw copper items, tumble-polish them with steel shot,... -
ImpressArt Aluminum Cuff Bracelet Blank, Tapered, 6x7/8" (Each)
ImpressArt$1.04These blanks require finishing, which might include decorating (stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional jewelry-making... -
Bracelet Finding, Cuff, Open, 1" (Each)
$9.04Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Centerline Cuff w Beadable Plate, 7.63x.38" - Gold Plated (Each)
$12.17Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
Amate Studios Silver Plated Bracelet Component, Cuff, Small (Each)
Amate Studios$3.80A Tip on Using Silver Plated Amate Studios Bezels On plated Amate Studios bezels, the plating is applied after hand-soldering is complete to create a more uniform finish. Baking, firing or otherwise applying heat may cause this plating to melt... -
Bracelet Blank, Copper Cuff, 1/2x5-3/4" (Each)
$3.84These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Brass 1/4" Cuff Bracelet Finding (Each)
$2.13Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give an effortless high polish to raw brass items, tumble-polish them.To create an... -
Centerline Cuff w Beadable Plate, 7.63x.38" - Rhodium Plated (Each)
$9.58Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
Amate Studios Silver Plated Bracelet Component, Cuff, Medium (Each)
Amate Studios$3.80A Tip on Using Silver Plated Amate Studios Bezels On plated Amate Studios bezels, the plating is applied after hand-soldering is complete to create a more uniform finish. Baking, firing or otherwise applying heat may cause this plating to melt... -
Silver Plated Bracelet, Cuff, Changeable (Each)
$6.80All of our sterling silver is nickel-free, cadmium free and meets the EU Nickel Directive. See Related Products links (below) for similar items, additional jewelry-making supplies that are often used with this item, and general information about these... -
Bracelet Finding, Cuff, Concave, 1/2" (Each)
$2.45Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Solid Copper Cuff Bracelet Finding, 1/2 x 7" (Each)
$4.88Raw copper is unplated, and may not be as shiny and smooth as most plated finishes. To remove tarnish, use copper cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To remove rough edges and give a beautiful high polish to raw copper... -
Stamp Guides, Sticker Booklet for Bracelets (Each)
ImpressArt$4.80See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! -
5/8" Copper Bracelet Strip, 24-gauge (Each)
$10.36See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! -
Centerline 9 Row Cuff, 6.75x.75" - Rhodium Plated (Each)
$10.27Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -
Bracelet Blank, Brass Cuff, 3/8x6-1/4" (Each)
$2.45See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! -
Bracelet Blank, Copper Cuff, 1/4x6-1/4" (Each)
$2.55These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. 14-gauge copper can be a little tough to stamp. We recommend... -
Bracelet Blank, Copper Cuff, 3/8" x 6-1/4" (Each)
$3.07These blanks require finishing, which might include decorating (stamping, gluing, enameling, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing. See Related Products links (below) for similar items and additional... -
Brass 1/4" Channel Cuff Bracelet (Each)
$3.98Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and... -
Brass 1/4" Wide Scroll Pattern Cuff Bracelet, Large (Each)
$3.33These bracelet blanks require finishing, which might include decorating (etching, stamping, gluing, etc.); adding holes; filing, sanding, or hammering the edges; polishing and/or antiquing.See Related Products links (below) for similar items and... -
Centerline 3 Row Cuff, 8x.38" - Rhodium Plated (Each)
$4.18Centerlineā¢ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,... -