Rings & Things Jewelry Blog

Created by: Summer MelaasDesigner TipsLay out 10 sunstone beads in an ombre pattern (lightest to darkest).Cut two feet of the 26g wire.Wrap a few tight wraps at the top of the wire part of the ear thread, and thread one bead on the wire. Holding the bead tight in place, wrap the wire twice around the ear thread.Repeat until you have wrapped all the beads down to the loop at the bottom of the ear thread. Cut off excess wire. Using your chain nose plier, pinch the ends of the wrapped wire to tight …

Created by: Veronica GreenwoodDesigner TipsCut two 18" pieces of leather.Fold one strand in half. Make a larks-head knot by feeding both ends through the loop on the anchor charm, then back through the leather loop formed on the other end of the cord. Pull tight.Fold the other strand in half over the other end of your anchor and feed both ends through the loop formed. Pull tight.At one side of the bracelet, add a porcelain bead, a small barrel bead, and another porcelain bead to both strands of …

Created by: Veronica Greenwood   Designer TipsCut three equal lengths of waxed cord (make sure to cut enough cord for the knotting).Fold all three cords in half and slide your pendant to the center of one of the cords.Knot all three cords together on each side of the pendent (you will have one cord thru the pendent and two cords behind the pendant).All knots in this project are basic overhand knots.Randomly knot and add beads in a pattern that you like until you get your desired look and le …

This style of jewelry has a variety of names, including "hand chain" and "pirate bracelet". Whatever the name, we think you'll love the colors!Created by: Veronica GreenwoodDesigner TipsCut 2 feet of wire, and wrap (lash) around one side of cut-out on connector. Add one 4mm round crystal and wrap wire 3 times. Add one 3mm crystal, wrap 3 times, add another 4mm round, wrap 3 times, add final 3mm crystal, wrap 3 times, trim end, and tuck in neatly where it won't catch or scratch. Repeat on the oth …

Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jewelry-making? See Basic Jewelry-Making Technique Sheet PDF.)Arrange the crystal dangle colors randomly and attach two dangles per link of chain, using 3mm jump rings.The original project used a combination of 3 and 4mm crystal bicones in shades of copper and topaz, but now we have very few 3mm bicones …

Created by: Michelle HorningDesigner TipsFor step-by-step instructions on creating a macramé bracelet, see How to Macramé a Hemp Bracelet.The pattern for this bracelet is:5 P 5 P 5 P 5 P - 3 C 1 P 1 P 1 P 1 C 3 - P 5 P 5 P 5 P 5P = Picasso Bead, C = Cowrie BeadThe number listed above is the number of Square Knots (Remember that 1 square knot consists of 2 half knots)Make sure the shells are turned the same way. They are not symmetrical.When adding the Cowrie beads, pull the cord behind each bead …

Created by: Swarovski's Create Your Style Design TeamDesigner TipsIf using the bulk cable chain, measure desired length, use 2 pairs of chain-nose pliers to open link at desired length, attach one end of the toggle, and repeat for other end.Cut the wire into sixteen 1" pieces and set aside.Attach one jump ring on each sea life charm and set aside. For the shell bead slide it onto one head pin, make a simple loop and set aside.Using one head pin, slide on a 4mm pearl and make a simple loop. Using …