Rings & Things Jewelry Blog

Created by: Summer MelaasDesigner TipsFollow wire-wrapped loop instructions in Jewelry Basics 101 (PDF) to create wire-wrapped link sections with the crystal beads. Be sure to add the various components to your beaded links before finalizing each wire wrap! (Alternately, make simple loops, and /or use jump rings to connect the sections.)Use 24-gauge wire to link one Aurum (gold) crystal to bottom right of songbird and to 5" of chain.Use one gold crystal to link the other end of chain to bottom l …

Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sheet (PDF)Suggested Supplies2 each #44-780-40 Blank, Copper, Lightning Bolt, 49x13mm (Copper)1 pkg of 10 [use 2] #44-940-52-AS Charm, Cast, Swallow (Antiqued Silver Plated)1 doz [use 2] #05-328-04-160 Crystal, Bead, Faceted Bicone, 4mm (Crystal/ Silver Shade)1 doz [use 2] #05-328-06-156 Crystal, Bead, …

Design by: Katie Hill (TierraCast)Designer TipsTIP: Don’t stretch the cords when knotting. Tie with cord relaxed, but with extra slack taken up.Cut three 12" strands of elastic cord. Pull on the ends to prestretch the cords.Pick up one strand and string on one Amazonite gemstone bead and one 3mm spacer (choose black or silver). Repeat 23 times. String final gemstone bead and one large hole nugget spacer.Tie ends of cords together with a Surgeon's Knot. (Fig 1) Tighten securely.For the next stran …