Rings & Things Jewelry Blog

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn't fill gaps.)File/sand/polish to any rough edges or deep scratches.Snip 5-10 tiny (1-2mm long) pieces of solder into a small bowl.Use a small paintbrush to coat the back of the brass "ninja star", and the front of the copper disk with flux. (You may need to mix the flux to a more paste-like consiste …

Created by: Polly Nobbs LaRue Designer TipsClean the door blanks with fine-grit sandpaper and a polishing cloth, or in a tumbler for 2-3 hours.Find a pleasing portion of the Christmas tin, that fits in the window of the door blank. Draw around outside of door blank with fine-point permanent marker. Cut tin with shears at inside edge of line.Stamp stars randomly on the front door panel, and add texture as desired with the rounded end of a ballpeen hammer. Stamp or hammer a design or pattern on th …

This project uses Swarovski crystals. Created by: Tiffany WhiteDesigner TipsMark all six of your triangle blanks with a permanent marker dot in one of the points and straight down on the opposite side.Use the hole-punching side of the riveting tool to make a hole in the triangle blanks where you placed your dots.Use the riveting tool to rivet the triangles together with the brass rivets.Antique the brass pieces with Novacan black.Using the sanding sponge remove some of the patina from the brass …