Rings & Things Jewelry Blog

Created by: Summer Melaas   Designer TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detailed stamping instructions. If you're new to stamping, get a few extra tags, as stamping can be unpredictable and there may be mess ups.Place crystal stones in bezels, and carefully bend prongs down using fingers and/or nylon-jaw pliers.Add a large round jump ring to the basketball charm. For best way to open and clos …

Created by: Rita Hutchinson   Designer TipsCut bezel strip to size (one 8-12" piece) and flatten/ work harden with nylon hammer.Add texture to both sides of bezel strip with texture stamping hammer and included "sprinkles" design stamp. (The wire may distort somewhat. Don’t be concerned, this will not be noticeable at the end.)Cut textured bezel strip in half.If you don’t have a tumbler, use Novacan to antique the wire at this step, and polish the high points with steel wool.Wrap 1 textured …

Created by: The Swarovski Crystal CREATE YOUR STYLE Design Team   Designer TipsUsing alcohol, clean off all the links and set aside to dry.Using one 10mm 4470 Scarlet fancy stone, glue into matching finding. Repeat four times; set aside to dry for 24 hours.Using one head pin slide on one 6mm Rouge Pearl and make a simple loop. Repeat 23 times and set aside. (Use 1-step looper or see Jewelry Basics 101 - PDF).Using two small jump rings, attach each jump ring separately to the same …

Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-brush patina sparingly to the surface of the bracelet.Let Patina dry.Set crystal stones in settings with nylon jaw pliers. (Smooth down further with burnishing tool or back end of Sharpie as needed).Determine placement of crystal settings, and press awl through the holes in the setting to mark hole loca …

This stylishly simple bracelet looks great worn alone, or with other bangles or leather bracelets.  Created by: Sondra Barrington   Designer TipsCut leather flush after measuring. Use a dab of glue inside one cord end. Insert leather into the cord end and gently pinch the cord end prongs together until secure.Slide guru bead onto leather.Finish other end of leather cord.Use a small jump ring to attach cord end to lobster clasp, and add a large jump ring at the other end of the bracelet …