27 results for '69-271-91'

News & Information (27)

Pumpkin on the Vine Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMake 2 matching spiral head pins. Follow the steps from the Rings & Things blog post "How to Make Spiral Head Pins.Add the following beads to a spiral head ...

Shining Stars Lashed Earrings Tutorial(Post)

Created by: Mollie Valente Designer Tips For a version of this project with step-by-step images, check out Mollie's How to make Lashed Kidney Wire Earrings blog post.Choose two matchin ...

Tangerine Ring Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

Arrow - Etched Copper Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

Hearts and Rain Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdd bicone crystals to the head pins, and make wrapped loops directly onto the loops of the filigree.For the top beaded pin, cut the ball off a ball-end head ...

Victoria - Etched Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsEtch earrings (See etching tutorial below).Place cushion in cushion setting and fold over tabs using nylon-jaw pliers or a burnisher.Attach French hooks to top o ...

Stella, A Night on the Town Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsString desired pattern of spikes onto the Vintaj® Creative Hoop.Gently bend hoop so the holes are aligned tightly together.Select a medium-sized jump ...

Pieces of the Sky Cuff Bracelet Tutorial(Post)

Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

Winter is Coming - Post Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsAttach the pinch bail to the top of the snowflake crystal. Align the bail prongs and the crystal hanging holes, then pinch together. Once attached, you can use ...

Sandra Leather Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-bru ...

Sundance Bolo Tie Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions to make the Sundance Bolo Tie Necklace, see our blog post: How to Make a Silk Ribbon and Cameo Bolo Tie NecklaceHelpfu ...

DIY Adjustable Bangle Bracelet Tutorial(Post)

This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

Just Peachy Leather Necklace Tutorial(Post)

Created by: Bridget AustinDesigner TipsSee the Jewelry Basics 101 PDF for hints and instructions on how to open and close jump rings.The cord ends and barrel beads are all crimped, no glue required!S ...

Sour Patch Bracelet Tutorial(Post)

Created by: Rita Hutchinson 12mm #4470 Cushion Squares by Swarovski are nearly gone, but these settings also work with most other brands of 12mm cushion squares. Shop remaining colors while they ...

5 Minute Rings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

Autumn Waterfall Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips3 sunny shades of orange crystal bicones cascade in a warm ombre waterfall, from Vintaj hammered brass rings.Make wire-wrapped loops using ball-end h ...

Tassel and Sparkle - Simple Charm Bracelet Tutorial(Post)

Chain bracelets adorned with a simple charm continue to be popular. You can customize this design by using a different colored Swarovski rivoli stone, different styles of chain, or tassels made of di ...

Northern Copperhead Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

Sand Dollar Leather Bracelet Tutorial(Post)

This stylishly simple bracelet looks great worn alone, or with other bangles or leather bracelets.  Created by: Sondra Barrington   Designer TipsCut leather flush after measuring. Use a dab ...

April Love - Bracelet Tutorial(Post)

Created by: Sondra Barrington How can I customize thee? Let me count the ways...  Designer Tips  Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silve ...

Twilight Tide Pool Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner Tips Memory wire is steel, and unkind to most jewelry tools. Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 coils. Th ...

Silver Sea Urchin Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer Tips Memory wire is steel, and unkind to most jewelry tools.Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 ...

grrrrr / breathe bracelet tutorials(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a ruler and Sharpie to draw a dot or line in the middle if the bracelet. Write your word or phrase on a piece of paper, about the size you'll be stamping ...

When the Day Met the Night(Post)

Created by: Tricia Van LeuvenShimming moonstone, sparkling Metallic Sunshine crystal, and Mystic Black pearls make a perfect set of jewelry for the next solar Eclipse. Try subbing malachite, azurite ...

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Paisley Palette Pin Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...