127 results for 'side flush cutter'

News & Information (127)

Northern Copperhead Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

Not-So-Shiny Bangle Bracelet(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse heavy-duty flush cutters to cut approximately 1 loop from the spool of 12-gauge antiqued copper wire. Make sure both ends are cut flat (flush) so they fi ...

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Shining Stars Lashed Earrings Tutorial(Post)

Created by: Mollie Valente Designer Tips For a version of this project with step-by-step images, check out Mollie's How to make Lashed Kidney Wire Earrings blog post.Choose two matchin ...

Celebrations Day of the Dead Tutorial(Post)

Celebrations Day of the Dead bracelet depicts the musical side of this holiday. The beautiful TierraCast musical charms nicely offset the Swarovski Crystal Mystic Black pearls.Created by: Swarovski's ...

Transylvanian Visitor Pin Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsLaminate or seal the image with Crafter's Pick™ The Ultimate adhesive.Glue the image onto the blank "back" with the Crafter's Pick.Use side cutters to remove p ...

Blushing Bride Bracelet Tutorial(Post)

Delicate-looking filigree bead caps give this memory-wire bracelet the crowning touch. Created by: Rita Hutchinson Designer TipsAdd bead caps to each end of (2) 8mm fine rocks tubes and str ...

TierraCast Succulent Post Earrings Tutorial(Post)

Created by: TierraCastDesigner TipsPlace one bicone, one 8-10mm amethyst rondelle and another bicone onto eye pin. Cut remaining eye pin with wire cutters, leaving .25" to form into loop to close. At ...

Crystal Angel Earrings Tutorial(Post)

Designer TipsAdd a cone bead (wide side first) to a head pin. Next add a wing bead, round crystal bead, and the rhinestone wheel bead (halo).Make a simple loop at the top of the head pin. For best wa ...

Drops of Light - Pearl Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step pictorial instructions on making this pair of earrings, see Mollie's blog article: ...

Flowers Cove Viking Knit Necklace Tutorial(Post)

Created by: Amy ScaliseDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create a Viking knit necklace using 20-gauge wire. The 16" necklace uses about 8 yards of wire.Use 28-g ...

Mermaid in the Moon Necklace Tutorial(Post)

The lovely glass bead used in this free necklace design goes by a number of names including mermaid beads and mystic aura beads. They've even been mistaken for moonstone gemstones! They are 2 half-sp ...

Beachcomber Wine Glass Charm Set Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsCreate a colorful beaded drop for each wine glass marker, using gemstones or other beads of your choice. New to jewelry-making? See Basic Jewelry-Making Tec ...

Cardio Amour Wire Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsFor illustrated step-by-step instructions for this necklace, please see the full Heartbeat Necklace Tutorial in our blog.Suggested Supplies 1 ea ...

Nesting Earrings Tutorial(Post)

This project is a great way to get started with wire, because it's very free form, and a bit of messiness is not only ok, it's actually recommended!Use your favorite oval beads - they can be pearls, ...

Brass Arrow Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the wire in half and form an "eye" loop on one end of each wire.Flatten the loop by striking with a chasing hammer on a steel block.Add the following beads ...

Infinite Path Earrings Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 ofBeautiful Wire Jewelry for Beaders: Creative Wirework Projects f ...

Infinite Path Bracelet Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 of Beautiful Wire Jewelry for Beaders: Creative Wirework Projects ...

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

Sea Maiden Resin Belt Buckle Tutorial(Post)

Created by: Toni PlastinoDesigner TipsTo prevent the image from bleeding, seal the front and back with Mod Podge® and let dry. Once dry, glue the image into buckle blank.Glue on embellishments such a ...

Rose Quartz Healing Necklace Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsCut 12" of wire to wrap the gemstone donut.Center the wire on the donut and wrap each side 2 times.Pinch the two wires flush together with chain-nose pliers.Use ...

Little Spiral Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsThe extra jump rings used when hanging the cluster of charms on this necklace help keep the spiral charm facing forward.For instructions on making beaded head ...

Man in the Maze Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsString three 8mm round gemstone beads on an eye pin.Finish the end of the eye pin with a wrapped loop; snip off the excess eye-pin tail. For step-by-step instru ...

Pearls and Swirls Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCreate two BRONZclay™ charms according to the manufacturer's instructions. Like most metal clays, BRONZclay must be fired in a kiln. BRONZclay shrinks approxim ...

Wind Dancer Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsCut about a foot of wire and place the wire almost 3/4 of the way in the hole of the feather.Cross wires over each other above the top of the feather. Bend the s ...

Labor of Love Centerpiece(Post)

Created by: Amy MickelsonDesigner TipsSize and cut an image to fit the glass tile.Use a paintbrush to apply the Inkssentials™ Glossy Accents to seal and affix the image to back of the glass tile. Onc ...

Classic Crystal Christmas Trees Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsFor complete step-by-step directions, visit our Blog post: Twelve Days of Christmas Jewelry Designs: Swarovski Crystal Tree EarringsFree Technique Sheets & ...

Pumpkin on the Vine Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMake 2 matching spiral head pins. Follow the steps from the Rings & Things blog post "How to Make Spiral Head Pins.Add the following beads to a spiral head ...

Snowy Crystal Christmas Tree Earrings Tutorial(Post)

Design by: Swarovski's Create Your Style Design Team and Rings & Things.Designer TipsFor each earring, string onto one head pin: one 12mm margarita; one 10mm margarita; one margarita 8mm; one 6mm ...

Sparkle Motion Gypsy Ring Tutorial(Post)

Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

Silver Spray Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsWhen making a large number of beaded dangles, it is quickest to do them assembly line style. Figure out the correct length for the wire, and trim all wires, st ...

An Ode to Ojo Earrings Tutorial(Post)

Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

Baptized by Fire Bracelet Tutorial(Post)

Created by: Lindsey GreenDesigner TipsMix and match the crosses in any way you would like! No pattern is required.Adjust the length of the leather pieces and number of jump rings to change the size o ...

Shaping Up - Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsRemove the clasp from the end of one bracelet, and replace the oval jump ring with a round jump ring.For best way to open and close loops, see Jump Ring Hint i ...

Hexed Wire Bracelet - Tutorial(Post)

Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required!Created by: Rita HutchinsonDesigner TipsUnroll and straighten enough wire for all brace ...

Eclipse Cuff Links Tutorial(Post)

Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

Pearl Wraparound Swarovski Necklace Tutorial(Post)

Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing one head pin, slide on one 5844 10mm elongated baroque pearl, make a simple loop and set aside. Repeat 29 more times and set as ...

Foliage Necklace Tutorial(Post)

  Created by: Rita Hutchinson   Designer Tips  Make 45 wire-wrapped loop dangles, each with a single crystal bicone. See Basic Jewelry-Making Technique Sheet (PDF)Use a jump ring ...

Water Droplet Earrings Tutorial(Post)

Created by: Liz GrafDesigner TipsCut 8 links of your selected chain.I deconstructed and used part of a gunmetal chain tassel, or you can use 8 links from some scrap antiqued brass cable chain.Hook Br ...

Seaspray Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsFigure out the "top" and "bottom" of the chain, to make sure the shells hang correctly. Attach simple loop crystal dangles to the chain link under the seashell ...

Candy Cane Crystal Earrings Tutorial(Post)

Design by: CREATE YOUR STYLE and Rings & Things.   Designer Tips  Due to the tiny hole size on the 2mm beads, this design will not work on a head pin. Make a tiny head on each end of th ...

Enlightened Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing a longer head pin allows for double "messy" wrapping at the top of each crystal.Attach 4 crystal dangles to each of 6 jump rings. 2 extra jump rings face ...

Threads of Turquoise Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer Tips  Wire wrap the crystals directly onto the ear thread chain. See Basic Jewelry-Making Technique Sheet (PDF) for detailed instruction on ...

Swarovski Crystal Candy Corn Earrings Tutorial(Post)

Created by: The Swarovski Crystal design teamDesigner TipsCut wire into two equal pieces 18" long.Load onto one piece of wire: 13 Swarovski XILION Beads in Sunflower. Moving 6 beads off to one side, ...

Petite Artemis Angel Earrings Tutorial(Post)

This project uses Swarovski crystals and TierraCast® components. Created by: Rita Hutchinson. Design by: CREATE YOUR STYLE.Designer TipsUse the puffed rondelle bead to fill the opening in the large e ...

Going with Garnets Earrings Tutorial(Post)

We went with garnets, for a subtle January birthstone pair of earrings, and this design would be easy to make with any other birthstone, or simply use your favorite faceted beads for a non-birthstone ...

Boho Barbie Earrings Tutorial(Post)

Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

Lady 12 - Go Hawks - Earrings Tutorial(Post)

Created by: Liz GrafDesigner TipsPlace your spacer beads, cobalt blue bicones, and peridot round crystals on the eye pin in order.Create (and close) your eye pin the opposite direction of the way the ...

Shoreline Bangle Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsMake wire-wrapped loops with the pearls, and add a jump ring to each charm. For instructions on wire-wrapped loops, and best way to open and close jump rings, ...

Dark Fairy II Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsSince the inside of the cone is hollow, place one of the faceted beads on the headpin before stringing the cone. Next add the wings, head, and halo. This helps ...

Angel in Training Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsAdd crystals, angels wing beads and spacers to head pins and finish with a simple loop.Because the large end of the dome beads are concave, it can be tricky t ...

Artemis Christmas Tree Earrings Tutorial(Post)

A jewelry project from Rings & Things, based on a holiday earrings design from CREATE YOUR STYLE. Created by: Rita Hutchinson.Designer TipsFill the large end of the artemis bead with the 8mm puff ...

U Look Good in Pink Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsThe ""back"" of the U shaped connector is lashed to in this design, because it has a channel that helps to hold the beads in place.Check the spacing of the bea ...

Forest Fairy Angel Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsAdd crystals, angel wing beads and spacers to head pins and finish with a simple loop. (See Making Earrings 101 below for instructions to make loops.)Because t ...

Dapped Love Earrings Tutorial(Post)

Designer TipsStamp "Love" or desired word or pattern on 19mm brass disk, and antique it using Novacan. (See Metal Stamping 101)Punch a hole near the top of both disks using the 1/16" side of the 2-ho ...

Red Kite Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse fine tip round nose pliers in order to make loops that match the small loops on the eyepins. For looping instructions, see Jewelry Basics 101 (PDF)As you m ...

It's Good to Be King Tie Bar Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the copper strip to about 2" in length. Use a texture hammer or pattern stamp to apply a random pattern. File the corners and sides until smooth.Soft solder ...

Belle of Ireland Necklace Tutorial(Post)

Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

Crystal Tree Earrings Tutorial(Post)

Designer TipsAdd a smoky quartz cube bead to the head pin, then add the largest fern green margarita bead, then 1 each of the rest of the margarita beads in decreasing size order, and top with the me ...

TierraCast Bee Bracelet Tutorial(Post)

Created by: TierraCastDesigner TipsCut 20" of 1.5mm cord in your choice of color and cut again into 2 pieces, one 12" and one 8".Feed one open end of each cord through each end of honeycomb link (as ...

Wrapped in Rhinestone Lashed Bracelet Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, see the Easy to Make Lashed Rhinestone and Leather Bracelet blog post.Cut your leather to length (twice the wrist lengt ...

Little Sprout Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions showing how to engrave the pendant, see Rings & Things blog post "Jewelry Making DIY – Make a Micro Engraved Penda ...

Silken Bouquet Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsDetermine desired length of finished bracelet.Subtract 1 1/4" from total desired length for connector piece.Keeping toggle clasp parts attached, remove center ...

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

Circles in the Sand Necklace Tutorial(Post)

This is a lovely summery design with secure wire-wrapped links, and can also double as  November birthstone jewelry (citrines) or June (pearls).Created by: Veronica Greenwood Designer TipsU ...

Frida's Hands Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsString the following beads onto a eye pin: 1 round corrugated-metal bead, 2 rubber wire keepers (these work as positioning beads for the large-hole Mirage bead) ...

Wavy Gravy Necklace Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThis simply strung repeating pattern necklace has a finished length of 18"". The wavy disk beads give the design extra dimension and texture.For step-by-step ...

Stars-in-Jars Earrings Tutorial(Post)

Designer TipsFill the tiny glass jars with candy sprinkles in colors of your choice. Local team colors in fun shapes are often available in the baking aisle! This design uses bright green and blue fo ...

Vintner Earrings Tutorial(Post)

Vintaj findings are designed to be alterable ... here's a fine example!Created by: Rita HutchinsonDesigner TipsSlightly flatten the dome of the Vintaj bead cap. Bend 3 of the "legs" around the sides ...

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on t ...

Retro Tree Earrings Tutorial(Post)

The metallic glint of silver shade Margarita sew-ons reminds me of the retro aluminum Christmas trees of years gone by. I mixed up the crystals with TierraCast Bead caps, which echo the shape of a tr ...

Shadow Angel Earring Tutorial(Post)

Note: this design originally used the (discontinued) Lilac Shadow color of dome bead. Suggested subs: Jet Black Large Dome, or Crystal AB Small Dome. Both are 11mm in diameter.Created by: Rita Hutchi ...

Matte Satin Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

Icicle Lights Earrings Tutorial(Post)

Created by: Rita HutchinsonDesign by: Swarovski's Create Your Style Design TeamDesigner TipsAdd a crystal teardrop bead to a head pin (narrow side towards the head of the pin), add a rhinestone wheel ...

Southwest Chandelier Earrings Tutorial(Post)

Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

Naughty or Nice Bracelet Tutorial(Post)

A variation on a jewelry kit by TierraCastDesigner TipsCut a 6-8" length of the red pebble cord, add a small dab of superglue to one of the ends plus drag a small amount of glue around the sides of t ...

Great Odin's Raven Viking Knit Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create two Viking knit sections for the bracelet.The Lazee Daizee™ accommodates various sizes of wire.

Fringe Lily Earrings Tutorial(Post)

The patina on the tiny Swarovski crystal rivoli pendants is hard to see in the photo, but adds a subtle, very pretty effect when these earrings are worn.Created by: Rita HutchinsonDesigner TipsCut 2 ...

Buzzy Bee Necklace Tutorial(Post)

Created by: Kayla HeflingDesigner TipsInspired by the mood jewelry of the '60s and '70s, Mirage Beads™ are thermo-sensitive polymer beads that change color with small temperature changes.Separate the ...

Adjustable Necklace Extenders Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor instructions with step-by-step photos, please see our blog article: How to Make an Adjustable Necklace Extender.Suggested Supplies1 foot (use 4") #40-011-00 ...

Paisley Palette Pin Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...

Red Currant Road Bracelet Tutorial(Post)

Created by: The Swarovski Crystal CREATE YOUR STYLE Design Team   Designer TipsUsing alcohol, clean off all the links and set aside to dry.Using one 10mm 4470 Scarlet fancy stone, glue into matc ...

Luna Pearl Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsPlace 1 larimar bead, 1 bead cap, and 1 faceted pearl bead on a thin ball-end pin. Wrap it to the tail of the luna moth. New to jewelry-making? See Jewelry Basic ...

Sweet Skull Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loo ...

Craters of the Moon Earrings Tutorial(Post)

Learn simple but effective techniques to hammer-texture and dome metal disks to create beautiful handmade earrings.Created by: Mollie ValenteHammer and Dome the BlanksPlace a Vintaj blank on the stee ...

Ladylike Lariat Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsFreshwater pearls often have small holes. If the hole is too small, use a thinner headpin, or ream the opening with a battery operated bead reamer (#69-058).Fo ...

Flores de Muertos Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse 4 of each color crystal to create 28 wrapped loop crystal dangles.This finished length is 8.5". Use larger or smaller jump rings to adjust the length.Free ...

Becoming One Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsTo make the fingerprint heart pendant, form the desired pendant shape in silver metal clay. Allow it to dry, and pre-finish, then spritz thoroughly with distil ...

Subtle Sparkle Earrings Tutorial(Post)

These earrings are extremely light weight, but provide a lot of impact. Created by: Rita HutchinsonDesigner TipsCut chain to desired length. I used two sections of 2" and two sections of 2.5"To easil ...

College Days Charm Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsGlue crystal rivolis into settings. Create divots in a piece of scrap Styrofoam, to allow settings to dry flat.Create wrapped loops (or simple loops) with the ...

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

Buried Treasure Acorn Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsString the 4.5mm round corrugated bead onto the head pin.String two rubber earring backs onto the head pin, the first one positioned against the 4.5mm round cor ...

Promise Pin Tutorial(Post)

Created by: Mollie Valente Designer TipsUse 26-gauge wire to lash the beads to the pin back.Cut the chain into two pieces: 5-1/2" and 6-1/2" in length.Use 6mm jump rings to attach the chain to the pi ...

M is for Monogram Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFabricate the BRONZclay focal according to the manufacturer's instructions. Like many other metal clays, BRONZclay must be fired in a kiln. BRONZclay shrinks ap ...

Slam Dunk Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner Tips Stamp player number onto the tag. (For detailed stamping instructions, see link below.)Add additional tags for multiple players, or use larger tags for team n ...

Snowman's Holiday Pearl Earrings Tutorial(Post)

Add some sparkle and shine to your holiday wardrobe. These snowman earrings are easy and quick to assemble.Created by: Rita Hutchinson.Design by: Swarovski's Create Your Style Design Team Design ...

Baroque Beauty Necklace Tutorial(Post)

Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

Custom Anniversary Bracelet Tutorial(Post)

Learn how to make a leather anniversary bracelet using porcelain number beads to "spell out" a custom anniversary date (7/7/90).Created by: Polly Nobbs-LaRueDesigner TipsUse a finished leather bracel ...

Products (0)