52 results for 'center pack tool'

News & Information (48)

Labor of Love Centerpiece(Post)

Created by: Amy MickelsonDesigner TipsSize and cut an image to fit the glass tile.Use a paintbrush to apply the Inkssentials™ Glossy Accents to seal and affix the image to back of the glass tile. Once

Sunrise Centerline Bracelet Tutorial(Post)

No fancy beading techniques or knots required -- If you can string beads with a needle and thread, you can create lovely designs with these bracelets!Created by: Veronica GreenwoodDesigner TipsStretch

Tivoli Centerline Earrings Tutorial(Post)

Save time with pre-drilled blanks and create a pair of fun earrings with size 11/0 TOHO or Delica seed beads in Scandinavian colors. "Tivoli" means "funfair" in Swedish.Created by: Summer MelaasDesign

Sunrise Succulents Earrings Tutorial(Post)

Created by: Veronica Greenwood     Designer TipsChoose the size of chaton to fit into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your charm and pla

Custom Mothers Day Stamped Necklaces(Post)

Here's a Mother's Day / Grandmother's birthstone jewelry idea that allows each child to stand apart from the others.Created by: Tiffany WhiteDesigner TipsNot sure which birthstones go with the months

Double Wrap Hammered Rings Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see the

Men's Cross Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsCut the leather at an angle to assist in fitting two ends through the hole of the cross connector. For a better grip on the end of the leather, consider

Safe Journey Pendant Tutorial(Post)

Created by: Mollie Valente   Designer TipsTo add texture, place the metal blank on the steel block and use the ball end of the hammer to make a lightly hammered surface.After hammering, the metal blan

A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/or

Noble Fir Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a COPPRclay™ pendant following the manufacturer's guidelines included with the clay and your kiln.Mollie made her own pattern sheet by taking a piece of t

Isla Tortuga Bracelet Tutorial(Post)

Created by: Veronica Greenwood   Designer TipsChoose the size of chaton to nestle into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your charm and pl

Samba Scarlet Smile Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsLinks Updated!Use a nylon hammer to gently flatten the rock & roll oval link before stamping the plain side.Stamp a practice pattern on paper to make sure yo

Red, White and Blue Sterling Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your hands or pliers) working from opposite sides to keep the stone centered. Once the prongs a

Campfire Skies - Riveted Barrette Tutorial(Post)

TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securely

Area 51 Pin Tutorial(Post)

I made this pin when the UFO and alien stamp first came out, but they are no longer in production. But there are so many other fun options for customizing this blank with features for other states! Ap

Not-So-Shiny Bangle Bracelet(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse heavy-duty flush cutters to cut approximately 1 loop from the spool of 12-gauge antiqued copper wire. Make sure both ends are cut flat (flush) so they fit

A Whale of a Tail Necklace Tutorial(Post)

Created by: Veronica Greenwood   Designer TipsCut three equal lengths of waxed cord (make sure to cut enough cord for the knotting).Fold all three cords in half and slide your pendant to the center of

REACH Stamped Aluminum Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsTo get a feel for the aluminum, firmly stamp the star in a few spots. For a detailed tutorial on metal stamping, see Metal Stamping 101 (PDF).Stamp the word R

Triple the Fun Bracelet Tutorial(Post)

Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing alcohol wipes, clean both Palace Crimp Ends on the inside.Using the black suede lace, make a double overhand knot in the center.

Cerulean Seas Pendant Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace 12mm rivoli in bezel setting and gently bend prongs over crystal using needle nose pliers.With a piece of 24-gauge wire, make a wrapped loop making sur

Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial(Post)

This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy MickelsonDesigner TipsUse heavy-duty cutters to cut memory wire.Lashing t

Wedding Date Necklace Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsStamp design: If you're new to stamping, see metal stamping technique sheet.When stamping the date, keep in mind that tiny stamps require less stamping streng

Jewel of the Nile - Necklace Tutorial(Post)

Created by: Summer Melaas and Veronica GreenwoodDesigner TipsCut 4" from the center of the 20" chain.Cut the 4" piece in half so you have two 2" pieces.Use a jump ring to add the pear crystal to the b

TierraCast Monstera Bracelet Tutorial(Post)

Created by: TierraCastDesigner TipsPre-stretch cord. Attach center of cord to button shank with Larks-Head knot, then tie overhand knot.* String nugget spacer onto both cord ends then tie second knot

2 Easy Celtic Knot Bracelets Tutorial(Post)

These bracelets are almost too easy!  Created by: Polly Nobbs-LaRueDesigner TipsSet the TierraCast Rivetable or Link in the center of the leather bracelet and use a fine-point permanent marker to mark

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper wi

Swarovski Emerald Eye Necklace Tutorial(Post)

Modified from a design created by Swarovski's Create Your Style Design Team Designer Tips Using the 1.5mm plier punch, or the smaller (silver) side of the 2-hole punch, make 6 holes in

Pearl and Tassel Charm Leather Bracelet Tutorial(Post)

Created by: Sondra Barrington Designer TipsThe ring connector is the focal of this bracelet. For a more free-flowing design, attach charms to the leather cording.Wire-wrap a pearl bead with a large lo

Wonder Woman Riveted Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThis bracelet is super fast and fun to make, once you have the necessary tools.The Domed Piercing Base allows you to pierce the domed bracelet without leaving

Pretty Posy Filigree Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking t

Twilight Earrings Tutorial(Post)

The Swarovski crystal cushion square in Heliotrope is not always available, but we love this simple, versatile project design -- and Amethyst AB is so pretty, that we've linked in some alternate sugge

The View Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsStamp front piece first (I used the "l" to make diagonal lines on the window frame). Flatten. Patina with Win-Ox™ and clean with steel wool.Clean back piece with r

Earth Day Hemp Macrame Bracelet Tutorial(Post)

One 8" strand of 8mm large-hole gemstone beads is enough to make 3 bracelets just like this. In case dumortierite is out of stock, more gemstone ideas are linked below.Created by: Michelle HorningDesi

Tschinkel's Circles Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsLay out a pattern on the blank bracelet. Free-hand, or using a ruler, mark each spot using an awl or an extra-fine point marker. (The heishi beads pictured ar

Fidget - Hinged Book Pin Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsRead the instructions included with the rivet piercing/setting tool (#69-900>69-900). Also check out the instructional video for more information on using thi

Illuminating Lotus Earrings Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsThoroughly clean your blank with Penny Brite. See our enameling blog article for tips, precautions and basic instructions for preparing the piece for enamel,

Diamonds and Lace Filigree Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking t

Sweet Skull Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loop

Russ Recycles Clip Tutorial(Post)

Created by: Amy MickelsonDesigner TipsPostage stamp charmThe canceled postage stamp was scanned and reduced to fit the square picture-frame charm.Seal front and back of the image with a waterproof bar

Om Mirage Choker Tutorial(Post)

Created by: Michelle HorningDesigner TipsFor step-by-step instructions on creating macramé jewelry, see How to Macramé a Hemp Bracelet.A choker will usually fit as a double wrap bracelet on most peopl

Good Thoughts Barrette Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsThe original alligator clip used for this barrette is no longer available, but our new French-style barrette backs are more secure (hold better in hair) and

Night Reflections Enamel Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse the smaller end of the 2-hole metal punch to punch a 1/16" hole near the top of the blanks. Be sure to center it, so the earrings hang properly.Clean the blan

Circles in the Sand Necklace Tutorial(Post)

This is a lovely summery design with secure wire-wrapped links, and can also double as  November birthstone jewelry (citrines) or June (pearls).Created by: Veronica Greenwood Designer TipsUsing a 12"

Namaste Chakra Choker / Double Wrap Bracelet Tutorial(Post)

Created by: Michelle HorningDesigner TipsFor step-by-step instructions on how to macramé a bracelet (or choker), see our blog article: How to Macrame a Hemp Bracelet.A choker will usually fit as a dou

Pop of Color Enamel Earrings Tutorial(Post)

Created by: Summer MelaasNote: We've had great success enameling our 24-gauge brass blanks, but for the most consistent color results, this enamel is best with copper blanks. Designer TipsTexture the

TierraCast Luna Moth Earrings Tutorial(Post)

Created by: TierraCastDesigner TipsCut a 6" piece of fine beading wire. String one hex spacer and a size 1 crimp bead onto both ends, forming a 1/4" loop at the center of the wire (this will be the to

Lotus Flower Yoga Bracelet Tutorial(Post)

Learn how to make this beautiful yoga bracelet featuring gemstone beads, rosewood mala beads, TierraCast spacers, and a Nina Designs lotus charm.Created by: Mollie ValenteSteps to Make this Yoga Brace

Tangerine Delta Earrings Tutorial(Post)

Created by: Megan HoldenDesigner TipsClean the inside of the rivoli settings with alcohol swabs, and allow to dry.Place a small drop of E-6000 or GS Hypo Cement into the cup of each setting and lightl

Products (4)