307 results for '2-cut'

News & Information (264)

Swarovski Emerald Eye Necklace Tutorial(Post)

Modified from a design created by Swarovski's Create Your Style Design Team Designer Tips Using the 1.5mm plier punch, or the smaller (silver) side of the 2-hole punch, make 6 holes in ...

Leather Petal Earrings Tutorial(Post)

You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

Palomita Wrapped Leather Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCast silver star beads and Bali-style flower beads make wonderful riveted accents. If a bead's hole isn't quite large enough, center the bead on the 1/16" cu ...

Devoted Wire-Wrapped Crystal Pendant Tutorial(Post)

This project uses Swarovski crystals. Created by: Amy MickelsonDesigner TipsCut a length of wire 20" long, or longer if desired. It is better to have plenty of wire for wire-wrapping the heart pendan ...

Simple Silk Swag Men's Magnetic Earrings Tutorial(Post)

Created by: Laurae SatherDesigner TipsCut the post portion off the rivoli earring finding.File the back until you have an approximately 4-5mm flat spot (about the same diamter as the earring magnet).

Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial(Post)

This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy MickelsonDesigner TipsUse heavy-duty cutters to cut memory wire.Lashing ...

Cool Your Jets Magnetic Men's Earring Tutorial(Post)

Created by: Laurae SatherDesigner TipsCut the post portion off the rivoli earring finding.File the back until you have an approximately 4-5mm flat spot (about the same diameter as the earring magnet) ...

Unpretentious Princess Earrings Tutorial(Post)

Created by: Janet BoyingtonThe star of the show, is the Princess-cut pendant! These sweet earrings are elegant and petite. Want to make a larger, flashier pair earrings, or use different colors? Clic ...

Aurora Sprinkles Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsCut bezel strip to size (one 8-12" piece) and flatten/ work harden with nylon hammer.Add texture to both sides of bezel strip with texture stamping ham ...

Disco Soul Necklace Tutorial(Post)

Dance the night away with shining faux kabibi disks, sparkling faceted gemstone beads, and sassy, swinging chain.  Designer TipsCut five pieces of chain: three 3.5"", one 4"" and one 4.25"" ...

Independence Day Fireworks Earrings Tutorial(Post)

Mix & match your favorite shades of red, white and blue -- we used Siam, Light Siam, Alabaster, Opal, Sapphire and Capri, but linked in a few other shades below as well.Created by: Polly Nobbs-La ...

Jewel of the Nile - Necklace Tutorial(Post)

Created by: Summer Melaas and Veronica GreenwoodDesigner TipsCut 4" from the center of the 20" chain.Cut the 4" piece in half so you have two 2" pieces.Use a jump ring to add the pear crystal to the ...

Bermuda Crescent Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

Footprints in the Sand Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsLay out 10 sunstone beads in an ombre pattern (lightest to darkest).Cut two feet of the 26g wire.Wrap a few tight wraps at the top of the wire part of the ear th ...

Paw Print Necklace Tutorial(Post)

Created by: Veronica Greenwood Designer TipsSimply slide the charm onto the chain, cut chain to desired length, and pop the clasp onto both ends.This ball chain is sold by the foot. Order 2 feet ...

Subtle Sparkle Earrings Tutorial(Post)

These earrings are extremely light weight, but provide a lot of impact. Created by: Rita HutchinsonDesigner TipsCut chain to desired length. I used two sections of 2" and two sections of 2.5"To easil ...

Sari Fishtail Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing files and sanding sponges, refine the ends of the cuff bracelet until it is smooth and comfortable to wear. Adjust shape by hand as desired, to f ...

It's Good to Be King Tie Bar Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the copper strip to about 2" in length. Use a texture hammer or pattern stamp to apply a random pattern. File the corners and sides until smooth.Soft solder ...

Memory Journal Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsSee the Create a Hinged Metal Memory Journal blog post for a step-by-step tutorial with images.Texturize or etch* various metal pieces for the journal and pa ...

Sunrise Succulents Earrings Tutorial(Post)

Created by: Veronica Greenwood     Designer TipsChoose the size of chaton to fit into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your ch ...

Witchy Earrings Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Shining Stars Lashed Earrings Tutorial(Post)

Created by: Mollie Valente Designer Tips For a version of this project with step-by-step images, check out Mollie's How to make Lashed Kidney Wire Earrings blog post.Choose two matchin ...

Sunset Ombre Earrings Tutorial(Post)

This earring project uses Kato PolyClay™ to create a pretty ombre effect that's easy to add to ear wires.Created by: Tiffany White Designer TipsUsing a craft blade, cut each of 3 colors of polym ...

Summer Cane Slice Earrings Tutorial(Post)

Created by: Amy ScaliseDesigner TipsCreate a polymer cane using the colors listed or those of your choosing.To make it easier to cut the cane slices, wait a day before cutting, or freeze the cane bri ...

Riveting 101(Post)

Learn the basics of riveting, including how to distinguish various types of rivets and how to set different rivets. Riveting is a classic, durable and popular way to create cold connections in jewelr ...

Geared Ring Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

Milky Way Cuff Links Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut the images to size.Seal with packing tape and cut out.Adhere to bottle cap with Hypo Cement.Apply UV resin following package instructions.Attach cuff link ...

Mermaid in the Moon Necklace Tutorial(Post)

The lovely glass bead used in this free necklace design goes by a number of names including mermaid beads and mystic aura beads. They've even been mistaken for moonstone gemstones! They are 2 half-sp ...

Pulse Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsDetermine placement of vinyl heishi beads, and mark each dot with an extra-fine point Sharpie®.Punch holes in the brass blanks with the cutting end of the Cr ...

A Whale of a Tail Necklace Tutorial(Post)

Created by: Veronica Greenwood   Designer TipsCut three equal lengths of waxed cord (make sure to cut enough cord for the knotting).Fold all three cords in half and slide your pendant to the cen ...

Sunset Ombre Necklace Tutorial(Post)

This necklace project uses Kato PolyClay™ to create a pretty ombre effect that's easy to display on cable chain, or another jewelry chain of your choice.Created by: Tiffany White Designer Tips&n ...

Emerald Isle Earrings Tutorial(Post)

These elegant Emerald earrings are perfect for a May birthday!Created by: Summer MelaasDesigner Tips Add a 3mm bicone, 4mm rondelle, 18mm emerald cut rectangle, and a final 4mm rondelle bead to a hea ...

Patterned Wire Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsMeasure, mark and cut patterned wire to desired length.File ends smooth with slightly rounded corners, so the wire pieces match the curve of the disk ...

Fringe Lily Earrings Tutorial(Post)

The patina on the tiny Swarovski crystal rivoli pendants is hard to see in the photo, but adds a subtle, very pretty effect when these earrings are worn.Created by: Rita HutchinsonDesigner TipsCut 2 ...

Fireblossom Earrings Tutorial(Post)

Created by: Rita Hutchinson  Designer Tips Determine desired loop lengths and cut leather. For these earring, I cut 2 pieces at about 5" and 2 pieces at about 3".String large-hole gemstone on ...

Cerulean Seas Pendant Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace 12mm rivoli in bezel setting and gently bend prongs over crystal using needle nose pliers.With a piece of 24-gauge wire, make a wrapped loop making su ...

Belle of Ireland Necklace Tutorial(Post)

Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

Lavender Sachet Tutorial(Post)

Created by: Toni PlastinoDesigner TipsCut desired images to size; place in picture frame. Fill organza bag with lavender, pull tight, add picture frame, and securely knot! Suggested Supplies1 dozen [ ...

Interchangeable Constellation Bangle Bracelet Tutorial(Post)

Create sparkling constellation jewelry in an hour, using minimal supplies and Swarovski Ceralun Ceramic Epoxy Clay, Crystal Clay, or your favorite epoxy clay. This quick-change bracelet form allows y ...

Bubble Wand - Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut a 10" piece of wire.To straighten and harden the wire, run the length of the wire through the nylon pliers.Use the ring mandrel to form a "bubble" loop (our ...

Kraken Belt Buckle Tutorial(Post)

Created by: Elisabeth ValenteDesigner TipsConsider taking a jewelry-making class through a local college or art school. The Complete Metalsmith by Tim McCreight and Simple Soldering: A Beginner's Gui ...

Soar With Me Cuff Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsPatina, seal and use bracelet-bending pliers to apply a gentle curve to the metal sparrow before riveting it to the leather.For hints on applying Vintaj ...

Fleur de Bee Pendant - Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsPatina the bee and darken the frame with Win-Ox™.Apply wax to seal the pieces, after you have achieved desired patina effect.Attach the bee and filigree usin ...

Can Can Flowers Bobby Pins Tutorial(Post)

Created by: Toni Plastino   Designer Tips  Cut and flatten aluminum soda cans of your choice. Pick ones with interesting colors and patterns.Cut flower shapes with craft punches.Paint the f ...

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

5 Minute Rings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

Marquise Tears Earrings Tutorial(Post)

Created by: Summer Melaas   Designer TipsCut two 1-3/4" sections of chain.Cut four 1-1/2" sections of chain.Add one small and one medium Apatite bead to a ball-end head pin. Wrap onto bottom of ...

Metallo Elemento Bracelet Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips For a small wrist (shown), cut 2 pieces of leather each 5" long. For a standard men's bracelet, cut 2 pieces each 6" long. or measure the w ...

Sunny Day Skull Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCreate skull dangles and outer-circle Size 6 E bead dangles with headpins, corrugated beads, and seed beads.For step-by-step direction on making head pin loops ...

Geometric Chevron Earrings Tutorial(Post)

These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

Wind Dancer Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsCut about a foot of wire and place the wire almost 3/4 of the way in the hole of the feather.Cross wires over each other above the top of the feather. Bend the s ...

Sweeter Than Honey Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFirst make a chain using 8mm jump rings and large-hole beads:Twist open a jump ring and string it through a large-hole bead and then close the jump ring.Open a ...

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

Dumortierite and Copper Coin Necklace Tutorial(Post)

Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

Sunshine Squared Necklace Tutorial(Post)

Created by: Bridget AustinDesigner TipsNo jump rings are needed; all you need are the links from the chain, to combine the sew-on stones and clasp.See the Jewelry Basics 101 (PDF) for instructions on ...

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

4th of July Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

Balancing Act Asymmetrical Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

Tangerine Sunrise Earrings Tutorial(Post)

Created by: Summer Melaas   Designer TipsCut 3" of 26g sterling silver wire. Add 5 Indicolite (dark turquoise) 3mm crystals to the middle of the wire. Use chain nose pliers and bend wire to a 90 ...

Brass Arrow Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the wire in half and form an "eye" loop on one end of each wire.Flatten the loop by striking with a chasing hammer on a steel block.Add the following beads ...

Amethyst Cascade Earring Tutorial(Post)

Necklace ends can be used for things other than securing multistrand necklaces. This project uses necklace ends as a design element in cascading chain earrings.Amethyst is February's birthstone, maki ...

Witchy Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Noble Fir Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a COPPRclay™ pendant following the manufacturer's guidelines included with the clay and your kiln.Mollie made her own pattern sheet by taking a piece of ...

Bead Curtain Earrings Tutorial(Post)

Learn to make unusual chain fringe earrings with a dash of crystal. FREE Jewelry Tutorials. No blinkin ads. No login required. Created by: Rita Hutchinson Designer TipsThe bead pod just bar ...

Rose Quartz Healing Necklace Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsCut 12" of wire to wrap the gemstone donut.Center the wire on the donut and wrap each side 2 times.Pinch the two wires flush together with chain-nose pliers.Use ...

Custom Mothers Day Stamped Necklaces(Post)

Here's a Mother's Day / Grandmother's birthstone jewelry idea that allows each child to stand apart from the others.Created by: Tiffany WhiteDesigner TipsNot sure which birthstones go with the months ...

Modern Art Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsStretch and wax 2 yards of thread. Add a spare seed bead (stopper bead) about 2" into the thread.Stitch an edging stitch on one side of the GF square, following ...

Emerald City Garden Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor illustrated step-by-step instructions for making this pair of earrings, and links to additional sweet-and-simple designs, see our blog article: The 15-Minut ...

Sweet and Sour Engraved Bracelet Tutorial(Post)

Edged cuff bracelets also work great for leather, fabric, beaded designs and more!Created by: Rita HutchinsonDesigner TipsStamp or sketch design on aluminum sheet if desired.Follow marked (or freehan ...

Havasu Falls Earrings Tutorial(Post)

You can play around with the length of fringe on these earrings inspired by the Grand Canyon. Make them as short or as long as you would like them! My earrings in total length are just over 6". My lo ...

Bee Keeper Reliquary Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, check out the How to Create a Reliquary Pendant blog post.Cut and shape the blank: Measure and cut a brass blank 1 x 1- ...

Happy Octopus Bangle Bracelet Tutorial(Post)

  Created by: Mollie Valente   Designer TipsFor a step-by-step tutorial with images for this project, see the blog post: How to Make an Expandable Wire Bangle Bracelet.Use heavy-duty cutter ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Turquoise Bracelet Duo(Post)

Designed by: Guest Designer Deb FlorosSuggested Supplies 1 #21-463-896 3mm Diamond Cut Round Gemstone Bead - Hubei Turquoise - Color Banded (strand)4 #49-943-09-AB TierraCast Mini Hamsa Hand Charm - ...

Raspberry Beret Necklace Tutorial(Post)

Technically, this sweet pendant is topped with a strawberry quartz bead, but it's every bit as full of sass as the song it's named after.Created by: Veronica GreenwoodDesigner TipsCut two 8" pieces o ...

Silver Sea Urchin Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer Tips Memory wire is steel, and unkind to most jewelry tools.Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 ...

Wrapped in Rhinestone Lashed Bracelet Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, see the Easy to Make Lashed Rhinestone and Leather Bracelet blog post.Cut your leather to length (twice the wrist lengt ...

Lady-Leg Etched Earrings Tutorial(Post)

These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

Twilight Tide Pool Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner Tips Memory wire is steel, and unkind to most jewelry tools. Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 coils. Th ...

Golden Sunshine Bracelet Tutorial(Post)

Created by: Janet Boyington Designer TipsCut three 10" strands of gold Beadalon stringing wire. My bracelet measures about 6.5" when competed and ready to wear. Plan accordingly for larger ...

Graveyard Sweater Guard Tutorial(Post)

Created by: Liz Graf   Designer TipsMeasure the 3.9mm chain, and cut one 4" piece, and one 5" piece.Measure the 4.5mm chain, and cut a 6" piece.Attach the chains to the sweater guards with large ...

Elegant Fall Lariat Necklace(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 1 #20-111-223 TOHO Glass Seed Bead, Size 11, 2.1mm, Antique Bronze (Tube)1 #20-226-913 Miyuki Seed Bead, size 15/0 - Galvanized Gold Duracoat ...

Cognitive Resonance Pendant Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsWhen scouring yard sales and 2nd-hand stores for old watches, try to pick up a wide variety of brands and eras, for the best variety of gears. Or look ...

Celebrations Day of the Dead Tutorial(Post)

Celebrations Day of the Dead bracelet depicts the musical side of this holiday. The beautiful TierraCast musical charms nicely offset the Swarovski Crystal Mystic Black pearls.Created by: Swarovski's ...

Interchangeable Bracelet Tutorial(Post)

All chain and settings used below are in Antique Brass, but Silver Plate and Antique Copper settings are also available!Created by: Bridget AustinDesigner TipsUse chain nose pliers or a burnishing to ...

Summer Rain Bracelet Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsPlace a wire guard on the round link and crimp a 10-inch piece of flex wire through the wire guard (see Jewelry Basics 101 - PDF).String one each in this or ...

Savannah Earrings Tutorial(Post)

Created by: Megan HoldenDesigner TipsClean the inside of the rivoli settings with alcohol swabs, and allow to dry.Place a small drop of adhesive into the cup of each setting and lightly but firmly pr ...

Angel in Training Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsAdd crystals, angels wing beads and spacers to head pins and finish with a simple loop.Because the large end of the dome beads are concave, it can be tricky t ...

Mixed Metal Beaded Scallop Bracelet(Post)

Designed by: Guest Designer Deb FlorosSuggested Supplies 3 #26-750-25-4 TierraCast Double Hammered Baule Bead - Gold Plated (Each)1 #26-840-36-AC Antique Copper Plated Shallow Bead Cap, 4.2mm - Spec ...

Pearl and Tassel Madness Earrings Tutorial(Post)

Created by: Janet BoyingtonDesigner TipsCut six 2" lengths of chain.Cut 5" of Artistic wireMake a loop with round nose pliers, slide 3 lengths of chain onto the loop, wire wrap that end. For step-by- ...

Tears of an Angel Earrings Tutorial(Post)

Created by: Mandi DingmanDesigner TipsCut two 16-18" pieces of 24-gauge wire. It is better to have plenty of wire for wire-wrapping the pendants, depending on how much of the crystal you want to cove ...

Enameled Yellow Submarine Tutorial(Post)

2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

Tiny Living Terrarium Necklace Tutorial(Post)

Created by: Summer Melaas   Designer TipsAdd about 1/2" of soil, a small amount of moss, then sedum or other tiny succulents to a glass bottle charm. Total dirt/moss should be about 3/4". M ...

TierraCast Succulent Post Earrings Tutorial(Post)

Created by: TierraCastDesigner TipsPlace one bicone, one 8-10mm amethyst rondelle and another bicone onto eye pin. Cut remaining eye pin with wire cutters, leaving .25" to form into loop to close. At ...

Good Thoughts Barrette Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsThe original alligator clip used for this barrette is no longer available, but our new French-style barrette backs are more secure (hold better in hair) and ...

Fold-Formed Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsJewelry Lab: 52 Experiments, Investigations and Explorations in Metal has a great tutorial on fold forming. Plus of course, Charles Lewton-Brain's book Foldf ...

Forest Fairy Angel Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsAdd crystals, angel wing beads and spacers to head pins and finish with a simple loop. (See Making Earrings 101 below for instructions to make loops.)Because t ...

Poppy Field Pendant Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

Dzi Fishing Hook Necklace Tutorial(Post)

Created by: Megan Holden Designer TipsUse beading board or beading mat to arrange beads in pattern as shown in picture.String 10 seed beads onto a 20"" piece of beading cable and then building u ...