122 results for 'wire center'

News & Information (64)

Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial(Post)

This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy MickelsonDesigner TipsUse heavy-duty cutters to cut memory wire.Lashing t

Bejeweled Necklace Tutorial(Post)

Created by: Cindy Morris Designer TipsClose the hoop. Lash the rhinestone chain onto the hoop using Artistic Wire, wrapping around the hoop twice between each link of chain.Start and end the chain ove

Double Wrap Hammered Rings Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see the

Labor of Love Centerpiece(Post)

Created by: Amy MickelsonDesigner TipsSize and cut an image to fit the glass tile.Use a paintbrush to apply the Inkssentials™ Glossy Accents to seal and affix the image to back of the glass tile. Once

Pretty Posy Filigree Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking t

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.Cr

Tivoli Centerline Earrings Tutorial(Post)

Save time with pre-drilled blanks and create a pair of fun earrings with size 11/0 TOHO or Delica seed beads in Scandinavian colors. "Tivoli" means "funfair" in Swedish.Created by: Summer MelaasDesign

Bee Keeper Reliquary Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, check out the How to Create a Reliquary Pendant blog post.Cut and shape the blank: Measure and cut a brass blank 1 x 1-3

Mermaid in the Moon Necklace Tutorial(Post)

The lovely glass bead used in this free necklace design goes by a number of names including mermaid beads and mystic aura beads. They've even been mistaken for moonstone gemstones! They are 2 half-sph

Sunrise Succulents Earrings Tutorial(Post)

Created by: Veronica Greenwood     Designer TipsChoose the size of chaton to fit into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your charm and pla

Swarovski Crystal Candy Corn Earrings Tutorial(Post)

Created by: The Swarovski Crystal design teamDesigner TipsCut wire into two equal pieces 18" long.Load onto one piece of wire: 13 Swarovski XILION Beads in Sunflower. Moving 6 beads off to one side, a

Tangerine Sunrise Earrings Tutorial(Post)

Created by: Summer Melaas   Designer TipsCut 3" of 26g sterling silver wire. Add 5 Indicolite (dark turquoise) 3mm crystals to the middle of the wire. Use chain nose pliers and bend wire to a 90° angl

Modern Art Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsStretch and wax 2 yards of thread. Add a spare seed bead (stopper bead) about 2" into the thread.Stitch an edging stitch on one side of the GF square, following t

Cognitive Resonance Pendant Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsWhen scouring yard sales and 2nd-hand stores for old watches, try to pick up a wide variety of brands and eras, for the best variety of gears. Or look for bu

Go West Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMaking the Pendant:Cut the handle loop of the heart charm and file smooth.Mark hole locations with a Sharpie®, and use the hole punch to make two 1/16th-inch han

Ultra Simple Blue Rivoli Earrings Tutorial(Post)

These sparkling earrings use only 3 components, and 2 common pairs of jewelry pliers (available individually or in a kit). Ultra Blue AB is a vivid blue coating added to a Swarovski rivoli crystal. 12

Brass Arrow Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the wire in half and form an "eye" loop on one end of each wire.Flatten the loop by striking with a chasing hammer on a steel block.Add the following beads t

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn'

Crimping 101(Post)

Using crimp beads to finish a necklace or bracelet: 1. String a crimp bead onto the beading cord or wire cable, then string the clasp. 2. Bend the cable back through the crimp bead. 3. Tighten the loo

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with desired m

Choosing Clasps & Finishing Methods(Post)

Are you asking yourself "What clasp should I use for my bead stringing, wire lashing, kumihimo, multi-strand, chunky chain, awesome creation?"  There are 100's of options, and the "correct" answer is

TierraCast Luna Moth Earrings Tutorial(Post)

Created by: TierraCastDesigner TipsCut a 6" piece of fine beading wire. String one hex spacer and a size 1 crimp bead onto both ends, forming a 1/4" loop at the center of the wire (this will be the to

Stars-in-Jars Earrings Tutorial(Post)

Designer TipsFill the tiny glass jars with candy sprinkles in colors of your choice. Local team colors in fun shapes are often available in the baking aisle! This design uses bright green and blue for

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Sharp

Red, White and Blue Sterling Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your hands or pliers) working from opposite sides to keep the stone centered. Once the prongs a

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on th

Swarovski Emerald Eye Necklace Tutorial(Post)

Modified from a design created by Swarovski's Create Your Style Design Team Designer Tips Using the 1.5mm plier punch, or the smaller (silver) side of the 2-hole punch, make 6 holes in

Circles in the Sand Necklace Tutorial(Post)

This is a lovely summery design with secure wire-wrapped links, and can also double as  November birthstone jewelry (citrines) or June (pearls).Created by: Veronica Greenwood Designer TipsUsing a 12"

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper wi

Moonrise Necklace Tutorial(Post)

Created by: Summer Melaas and Janet BoyingtonDesigner TipsStretch and wax 1 yard of thread.Using a size 12 needle, add Delica beads to the charm following the instructions in the free printable PDFs b

Gear Head Bobby Pin Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips Always wear safety glasses when cutting, drilling or punching.The bobby pin is a little heavier gauge than recommended for the punch, so use a drill press

Ultra Blue Mehndi Earrings Tutorial(Post)

Extra-secure leverback ear wires keep these earrings safely in the ear -- no lost earrings! Ultra AB Blue may be a bit pricey, but it is stunning -- These simple earrings receive tons of compliments.C

Jewel of the Nile - Necklace Tutorial(Post)

Created by: Summer Melaas and Veronica GreenwoodDesigner TipsCut 4" from the center of the 20" chain.Cut the 4" piece in half so you have two 2" pieces.Use a jump ring to add the pear crystal to the b

Illuminating Lotus Earrings Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsThoroughly clean your blank with Penny Brite. See our enameling blog article for tips, precautions and basic instructions for preparing the piece for enamel,

Starry Night - Constellation Jewelry(Post)

Created by: Summer MelaasSo many options for Constellation necklaces!Pick your favorite blank (something thick, like 16-gauge).Find a constellation that you like. For a good star map, search the web,

Upcycled Cog Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsWhenever walking, watch for unusual/interesting metal objects on the ground! When they are an unknown metal, do not try antiquing them or punching holes with

Scrap Chain Tassel Earring Tutorial(Post)

Created by: Amy Mickelson   Designer TipsIf you buy spools of chain for various projects, you inevitably end up with scrap pieces. These left overs are too short for necklaces or maybe too fine a styl

Cute as a Button Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsCenter the button on the pendant finding and mark the hole locations with a Sharpie® pen. Punch holes in the pendant finding.Tie the button onto the pendant fin

DIY Lotus Paisley Bracelet(Post)

Created by: Sondra BarringtonDesigner TipsSet the cushion square crystal stone in the setting. Keeping the stone centered, use your fingers, a burnishing tool, or flat nylon-jaw pliers to gently bend

Red, White and Blue Sparklers Bracelet Tutorial(Post)

Need a little patriotic sparkle? This sweet bracelet is a brilliant red, white and blue sparkler for your wrist on Independence Day or any time of year. Bonus: it's easy to swap out the charms for oth

Carnival Queen Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsPlace 10mm cushion square stone into setting, and use nylon-jaw or chain-nose pliers to gently flatten the prongs onto the stone. See tips in our blog, for best w

4th of July Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prongs

The View Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsStamp front piece first (I used the "l" to make diagonal lines on the window frame). Flatten. Patina with Win-Ox™ and clean with steel wool.Clean back piece with r

Sun Tea Enameled Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of wh

Candy Corn All Dressed Up - Earrings Tutorial(Post)

Created by: Janet BoyingtonThese earrings were inspired by the Swarovski crystal candy corn earrings. Janet used a decreasing brick stitch to create the candy corn. Designer TipsBegin with the bottom

Hawks Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse nylon-jaw pliers or a burnishing tool to gently smooth the prongs and bezels down onto the stones. For step-by-step instructions, see our Use a 6mm jump ring

Pop of Color Enamel Earrings Tutorial(Post)

Created by: Summer MelaasNote: We've had great success enameling our 24-gauge brass blanks, but for the most consistent color results, this enamel is best with copper blanks. Designer TipsTexture the

Metals(Post)

Jump directly to illustration of gold-fill vs. gold plate.What are Elements and Alloys? Metals can be elements or alloys. Elements are the basic building blocks of chemistry. Examples of elements: Oxy

Dark Skies Enameled Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite a

Sand Dollar Leather Bracelet Tutorial(Post)

This stylishly simple bracelet looks great worn alone, or with other bangles or leather bracelets.  Created by: Sondra Barrington   Designer TipsCut leather flush after measuring. Use a dab of glue in

Products (58)